Electric Bikes Conversion Kits EMTBS eRoad/Commuting What's New?

Latest activity

What's new New posts New media New media comments New profile posts Latest activity
  • T
    Tony1951 replied to the thread Display unit or controller fault?.
    If it were mine, I would be especially interested in the connection between the controller and the display unit. Maybe water has got...
  • Nealh
    Nealh replied to the thread Display unit or controller fault?.
    Could be a faulty connection in the display, possibly comms affecting BT signal ?
  • Nealh
    Nealh replied to the thread Display unit or controller fault?.
    Click on your name , Top Right. Scroll down to settings LHS. Click on Preferences and check the email box and content options.
  • RobG_UK
    RobG_UK replied to the thread Display unit or controller fault?.
    General question for anyone: my forum preferences seem to suggest that I should receive an email notification whenever someone replies...
  • saneagle
    saneagle replied to the thread Exciting New Project.
    It's a standard BSA/Shimano type BB. That piece will come out when the tool arrives on Thursday.
  • chris_n
    chris_n replied to the thread Exciting New Project.
    Stick a hacksaw blade through the middle, fix it to a hacksaw frame and cut outwards towards the threads. As soon as you get though the...
  • RobG_UK
    RobG_UK replied to the thread Display unit or controller fault?.
    Thanks. I'll report back in the morning when I've removed the display from the bike and had a closer look.
  • RobG_UK
    RobG_UK reacted to saneagle's post in the thread Display unit or controller fault? with Like Like.
    It's better to not order anything until after you've discovered the fault.
  • RobG_UK
    RobG_UK replied to the thread Display unit or controller fault?.
    Thanks for replying, I appreciate it. I already did that with the connector between the hub motor and the controller and the one...
  • saneagle
    saneagle replied to the thread Display unit or controller fault?.
    It's better to not order anything until after you've discovered the fault.
  • T
    Tony1951 reacted to sjpt's post in the thread Exciting New Project with Like Like.
    My normal is to set a big adjustable spanner to the freewheel tool and clamp it in the workmate; then grab the tyre to turn the wheel...
  • RobG_UK
    RobG_UK replied to the thread Display unit or controller fault?.
    Many thanks for replying, I appreciate it. If I'm understanding correctly, either the display is cooked or a connection between the...
  • S
    sjpt reacted to Woosh's post in the thread Exciting New Project with Agree Agree.
    I once clamped the freewheel in a vice and grab the tyre to turn the wheel.
  • S
    sjpt replied to the thread Exciting New Project.
    My normal is to set a big adjustable spanner to the freewheel tool and clamp it in the workmate; then grab the tyre to turn the wheel...
  • saneagle
    saneagle replied to the thread Exciting New Project.
    Unfortunately, You have to remove it to get a crank-drive in.
Show older items
Top Bottom