Recent content by Andreas

It did:) Now the speed limiter is 50 km/h. The bike manages to reach like 32 km/h with no help from the rider under good conditions. In bad conditions with Heavy headwind its more like 27 km/h.

Update, since no one seem to know for sure I decided to give it a try. I ordered a King-meter display yesterday and as soon as it arrives I will try and se if it will bring me the opportunity to change the max speed.

This I have tried. Speed is still unfortunately still 25 km/h but it enables the twist throttle.

Yes, its an LCD. I tried and managed to get to the settings menu. The meter looks very much like this meter: http://www.esonic.lt/manuals/WH527.pdf Only that I can not reach all the settings from the link above. I only manage to reach level och backlighet etc. The other menus with speed...

Sure, just need to get to the garage first wich will be this thursday.

Ok, so this means the display trick might work? Is it a better bet to go with a kingmeter than with the original display for smaller Wheel bike?

Sure, here is a pic of the controller I had in my phone. I can fix better pics with the Cables as soon as I get to the garage on thursday. My display looks just like this one...

I have tried this and disconnecting them enabels the twist throttle but the speed limit is still there unfortunately.

I can not change the wheel size in my display. To change the wheel size I need to order a new dispaly and I just wanted check with you guys first.

By the way, here is the link to the partslist if anyone is in need of it: http://ecorideparts.com/

Hi, I need your advice on an idea of mine. My pedelec, an Ecoride Ambassador 2016 with 28 inch wheels, is of course restricted to 25 km/h (27 km/h in reality). In the display there is not, at least what I know of, possible to make any settings of interest. I managed to find an online...

Thanx again for the quick and very informative reply! I’ll start with the bike as it is for now. When the time comes for an upgrade i’ll Check back in. Regards!

Thanx a lot for the answers d8veh! I just disconnected the white cable and it did the job. The 25 km/h limit is now long gone:) Thanx also for the idea on removing the pin instead of cutting the cable so that i didnt ned to cut the cable. For information if anyone is interested the bike now...

Also i noticed there are nine cables attached to the engine. This menas that the hubengine has a speed sensor, correct? If so, the white cable is the speedsensor cable? If so again, do i cut this cable to disconnect the speed sensor and will this remove the speedlimit at 25 km/h? Regards, Andreas