blu joe's latest activity
-
Bblu joe replied to the thread DD hub max amps?.Ok thanks for the advice, i will get some thicker wire, what size do you recomend?
-
BHow many amps could i run this DD Hub motor at? Currently usimg 500w square wave controller. Does this motor seem big enough for 1000w?
-
-
Bblu joe replied to the thread Problem with throttle.Could have the cruise controll wires still connected so the motor keeps going on cruise, the cruise wires are usually black and blue and...
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.Dude that is clearly a direct drive hub motor not geated
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.This is this the other side, the 5 wires go into the axel, then where?
-
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.How can i translate these 5 hall wires into standard colouring? Red, brown,orange,yellow and green?
-
-
Bblu joe replied to the thread KT 22a controller display wiring.It is particularly the throttle sensor wire coming out of the controller that i am unsure of
-
BAccidentally cut the display, throttle, abd pas wires, please help me id the correct wires to add new SM plugs, see pics of controller...
-
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.Hall wires: So from other information i have figured out the phase and hall sensors colours match (brown,white,grey) , the thick...
-
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.I also have another hub motor i do not know the hall wire sequence, here in this pic
-
-
Bblu joe replied to the thread Hall wires in sparta ion hub motor.My controller is sensored, i need to know the colours on which is the power wires so not to blow the hall sensors
-
BI have a sparta ion 40nm rear hub motor, i need to add the hall wires to the controller, i remove the inbuilt controller from the hub...
-
-
BI do have P3=1. I was just pointing out if you set C5 to reduce the maximum power, then intermediate power levels (1-4) are also reduced...
-
Bblu joe posted the thread Brake sensor for magura hs11 hydraulic brakes in Conversion Kits General Discussion.Is it possible to connect some sort of brake sensor from my hudraulic brakes to my KT controller?
