Recent content by braham

Hi I know this is long time ago but have you been able to find an alternative display? I have the same issue Cheers

Hi all My kalkhoff pro connect with impulse 2.0 motor has suddenly stopped giving any assistance. The engine does however give walk mode assistance when I press long on the ± sign. When riding, the Odometer reads the speed and distance too but no assistance at all. Given that the engine turns...

Thanks for the reply @anotherkiwi . Is there any known solution round the issue of the very costly Bosch battery?

Hi Thanks in advance for your help. My gepida berig 1000 needs a new battery. I already have a working water bottle 5th battery. Would it be possible to use this battery on this bike given it's Bosch powered bike? My water bottle battery has just 2 cable (red and blank) where the battery...

Hi d8veh Many thanks for your help again with the replacement of the controller. I got it working finally even though it looks like I have lost the PAS. the motor start running as soon as I turn the throlle which is strange but at least I got my bike back and wait to dish the car and commute...

Yes, I am getting forward rotation which is good. I have checked the throttle (red, black) and getting 5.2v which I guess is also good news. However, it seems like the wire are not well aligned as you suggested. Currently you I get red-red, black-green, and green-black mean that I will need to...

Hi I think the problem I am facing here is because there are no connector coming from the brakes at all. I manage to do the self learning process successfully but when I disconnect the self learn wire I get nothing. In the absence of wiring coming from the brakes, is there a way to handle the...

Thank you again for the prompt reply. The only part I am not sure I understood is: "The low-level brake is for the normal brake switch wires. If you have two, you can join them together (parallel) to that connector or just connect the back brake one." Could you please clarify?

I have just opened the controller and here my findings: - purple have vcc making but about an inch away from the big resistor:( - the red is close to the resistor but no VCC mark or maybe I haven't seen it because of all the stuff condensed in one place:(

Hi d8veh I have no words to thank you enough with. This is very helpful. I have check the actual controller I have with me, the ignition is not black (phew!), however it looks like it's 2 wires (red and purple) according to another picture on the same product page on Aliexpress. I will attach it...

I am very new to this website as a member but I have been following threads here for a little while. My Xbyke has burnt its controller. Having looked around for a replacement controller I didn't find anything for a like a like for like replacement. I decided to take a small gamble on a...