Recent content by Kuhneye

Hi there, I have a Winora Radius ebike, 20" wheels. My stock seat post is 450mm long at 31.6mn. I want to raise the seat height by 100mm minimum to 150mm maximum above the minimum insertion line. I've looked everywhere but the longest (other than Brompton 550/600mm & telescopic) I can find...

Thanks will call them to find out

Again: I want to add "Nutlock" wheel security to solid axle.

I've looked into that but can't find a £40-£70 hub that will fit M10 axle, not even M9 axle. I thought if getting the bolt thru 9mm hub and putting in 9mm axle but can't find anything. I was also told that with the way I ride hard and jump up and down things that putting M9 or QR 9mm (5mm)...

Like I said: My fork is "Drop out" so bolt thru type will not work. I wish my fork was bolt thru as that would be the ideal for me. Have looked for bolt thru fork for 20" wheeled bike but it's not something that seems currently to be made. And I'm on a working budget too.

So what Hub will fit M10 solid axle that is 100mm OLD, 6 bolt disc?

The issue, like I mentioned multiple times: is I do want a solid axle as I want to add wheel nut security nuts with unique key. + I want a solid axle for the terrain and my riding style (I do deliveries on ebike around 200 miles per week simesomes over 300 miles per week) + I was told my fork is...

Can anyone tell me of a nutted solid axle front hub M9/M10 for OLD 100mm + 6 hole disc brake (even Centrelock at a push)? As mentioned my original hub is 10x100mm (10x108mm) solid nutted axle. I'm guessing my dropout fork is the deciding factor. I keep coming up empty handed googling.

Hey guys, I have open dropout on fork, M10 nutted axles both front and back, 20" wheels, Disc brakes both wheels hydraulic. I'm also looking to add on this once I know sizing for new front wheel : https://nutlock.co/collections/frontpage/products/nutlock-stealth-black-full-set My ebike is a...

Would a through axle 9mm work then? Something like this one: https://winstanleysbikes.co.uk/hope-pro-4-9mm-thru-axle-front-hub

Hi there guys, My ebike has M10 solid axle in both front and rear and I can't find a new hub for front! Very confusing. I've found m9 quick release hubs and 12mm, 15mm, 20mm solid axles. OLD spacing on my fork is 100mm. Any advice and suggestions of what to get would be appreciated. I'm...

Now I have a question for those of you who have been through this before: Is this just a system glitch of some kind? OR Is it a warning, like the guys mentioned early in this thread, that there is a loose wire between circuit board and coil? OR Something else that I need to get looked at...

I had this happen to me on Friday evening while working. I read this thread and another one about a system reset: http://www.pedelecs.co.uk/forum/threads/how-to-reset-the-yamaha-pw-motor-system-to-get-rid-of-errors.23315/ I tried what he said, BUT, it did not work as it's not clear about 1...

Has anyone else here had Error 28 on Yamaha PW system?

So do I have it right now?: https://www.taylor-wheels.com/bike-wheels/20-inch-bike-wheel/20-inch-rear-wheels/?laufrad_bremsart=28 https://www.taylor-wheels.com/replacement-set-7-speed-shimano-hg40-chain-freewheel-hg37...