Recent content by savas

  1. S

    Recommendation on a BMS swap (10s5p 36v)

    What do you think of this saneagle? BeMuchSafer 10S 35A 30A 36V Battery BMS 10S30A 10S35A BMS With Balance Function On/Off Switch Temperature Sensor for DIY E-Bike https://www.aliexpress.com/item/1005004823759310.html
  2. S

    Recommendation on a BMS swap (10s5p 36v)

    Yeah, I was thinking that too, thanks for the link. Yeah, noticed one reviewer mentioned this, so I guess when it comes I'll double check. Odd.
  3. S

    Recommendation on a BMS swap (10s5p 36v)

    Thanks. Hmm, actually forgot about the switch. The four pin slot up top plugs into a USB plug, kind of handy I guess, but not critical, doubt I can find a board that has that also. Edit: Managed to find these with a switch, however the amps are less than the old one. Ideally would like for...
  4. S

    Recommendation on a BMS swap (10s5p 36v)

    Would these be any good? 10S 36V 30A BMS Protection Board with Balance for 18650 Li-ion Lithium Battery:) https://www.ebay.co.uk/itm/174383454241 36V 35A 10Series BMS PCB Protection Board with Balancing for Li-ion Battery Cell Pack: Amazon.co.uk: Electronics & Photo...
  5. S

    Recommendation on a BMS swap (10s5p 36v)

    Hi, I've got a none functional battery BMS, just says LT-PD64U on the back of it. Could not find the exact model, however wish to buy a like for like or better. Those knowledgeable could kindly recommend alternatives please? I'm seeing some £10 ones, but barely a clue if any good. it's 10s5p...
  6. S

    LCD Display gone dead (or at least I think the fault is at the display)

    Unfortunately I don't have the bike with me so I'll have to go back to do some of these tests. I knew I'd forgotten some things when I was looking at it. Right now I've got the display pcb with me as I wanted to give it a clean with some alcohol as I suspected that the issue might be there...
  7. S

    LCD Display gone dead (or at least I think the fault is at the display)

    Thanks for the breakdown, appreciated. Hmm, don't have the bike with me so maybe it was something like that, need to go back and double check the new battery voltage, but it's a 36v battery so I thought it was more than fine. The old battery is indicating 36v though (on the bottom) so I guess...
  8. S

    LCD Display gone dead (or at least I think the fault is at the display)

    Thanks. I thought of hotwiring it to confirm if it works, but if the display is getting the 40v, but not working does it mean the controller is most likely OK, right? I guess I don't need to potentially mess it up by going in the controller.. Is that test worth it before proceeding with further...
  9. S

    LCD Display gone dead (or at least I think the fault is at the display)

    Hello Helping repair a Batribike Dash Folding Electric Bike for someone. It was left outside for a long period and stopped working, presume got water damage. Battery was replaced, however still no luck. Using the new battery, the display seemed to go on and then go grey across the screen...