Recent content by shinyuri1275

Was a bit tied up at work but finally got back to the controller. So I connected the pink and red wires, the throttle, the 3 phase wires to the motor and of course the battery. No halls connected up. Same issue though, it will spin for a couple of degrees and stop when I blip the throttle. It...

Alright, connected it all up and blipped the throttle, the wheel span about 5 degrees and didn't do anything else! When I touched the throttle again I could hear a click from inside the hub motor. I already have the controller and all gubbins associated with the motor (bought the ku123 after for...

Thanks, will try it out. It's being connected to a non hall sensor motor so I guess the 3 speed won't do anything then.

Thanks for the reply. So looking at the controller, I have the 3 speed switch and the electric switch connections. The 3 speed has blue white and black. The electric switch has pink and red. Are these the connections you are referring to? The other connections don't seem to be related to the...

Hi everyone, First post on these forums but long time lurker! Anyways, I was wondering if any of you could help me out. I have a KU123 controller and was wondering if I could make it so only the throttle was connected to the controller and make the thing work. I have no display and don't...