Search results

Edit: Got it working, thanks :)

Hello, I need help with a hoverboard I have. The charging port came completely off and there were 4 cables hanging, 2 black, 2 red. I opened the hoverboard and looked a bit online and understood that I need to solder the 2 black wires together and the 2 red wires together and then solder them...

Motor: 8Fun BFSWX02 48V250W(13) - It is hall sensored & it has 6 magnets speed sensor inside. Controller: KT48ZWSRT-LCD-C&D 48V350W - It is compatible for hall sensored motors. On Aliexpress: https://goo.gl/cezKPV

Wow, thats exactly what I'm dealing with, I showed the seller from aliexpress and he said: "This is the future of the KT controller. To prevent big current at the start." Does that sound legitimate, anyone else has that problem? @d8veh

Yea when I meant 6 magnets I meant 6 magnets in the speed sensor, I know it sounds weird since there is usually 1. And yea I guess there is about 18 to 20 magnets in the motor itself. Thanks again :)

Hey again, my motor is BFSWX02 48v 250w, I also did some research and found out that it has 6 magnets speed sensor inside, so I guess P2=6 is correct? It also seems by the replay of Wheel-E that he has the same issue, I will look into it more.

Thanks a lot for the replay Dave, really informative :), also I had a question about the P2, at default it used to be 1 as you said but when I tried all numbers from 0-6, only 6 shows most accurate speed, so I don't know if it depends on the P1 or something, and no my motor doesn't have any...

Hello, I have recently switched my controller to a KT controller and a KT-LCD3 display with also a wuxing thumb throttle and it all works kinda well and I had a few questions regarding the settings. I am not sure what is the correct P1 and P2 settings for me, I have a BFSWX02 48v 250w motor and...