Search results

I just bought some soldering bits so I'll give ot a go later in the week.

Think I will invest in a good soldering iron and spend an afternoon practising some joints and come back to it then. Thanks for all the help in general though. I just tested the new battery and it pulls like a motherfricker. Accelerates up steep hills instead of bogging down and tops out at...

Good point. I connected the wires with solder sleeves. It's all working fine - powers on. Kinda feel it's not the best solution though. I have no soldering experience. Maybe better to use xt60s or similar as simple to install? Cheers

Hello Pedelecs community, I have a new battery for my Klaxon Mini wheelchair scooter attachment. Everything is fine except the bullet connectors are male-male for negative and female-female for positive. I'm guessing all I need to do is buy some new bullet connectors, cut the old connectors off...

Ok thanks for that. Looking at the controller, it specifies 36v on the casing so probably 36v Any reputable brands I should consider. The Yose Power battery looked good to me. What do you think? Cheers

Hi Pedelecs, I have Klaxon Mini wheelchair scooter attachment that runs a bafang controller and 250w motor - https://bafang-e.cn/oem-area/drive-systems/drive-system/e-kickboard/h100-drive-system-1/ . The system came with an unbranded 36v 6ah bottle battery very similar to the Analogue Motion...

Follow #2: on my second Klaxon device - Klaxon Mini - I replaced the display with the EggRider v2 Bafang version and this worked to derestrict it. Before it was restricted to 10mph, it now revs to 17mph. Note, my first attempt I replaced the display like-for-like did not work as on the DP...

Just to follow up - I replaced the KT-LCD3 display on my Klaxon Monster and it worked. It now revs to 21mph. Cheers everyone.

Very good, thank you Dominic!

Hi everyone, I have the same issue. Klaxon restricted wheelchair attachment restricted to 16kph. The max speed setting is locked by the manufacturer. I see people have tried replacing the LCD3. Did this work?