1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BBS01 - change from 350watt to 250 watt with programming lead help?

Discussion in 'Woosh Clinic' started by sylkie, Feb 12, 2017.

  1.  
    sylkie

    sylkie Just Joined

    Joined:
    Apr 14, 2016
    Messages:
    27
    Likes Received:
    2
    Hi, I have a BBS01 350 watt kit and a programming lead but don't have the know how to adjust it to make it run within legal restrictions, can anyone help? Does anyone have a 250watt kit and a programming lead and could tell me the settings?

    I cannot handle really technical info so please please try to speak as simply as possible, I have attempted to get my head round this once before and gave up from there being too many variables and risks, I am hoping there is a simple way to take down the wattage and replicating the 250watt kit...hoping...

    many thanks
     
  2.  
    anotherkiwi

    anotherkiwi Pedelecer

    Joined:
    Jan 26, 2015
    Messages:
    3,732
    Likes Received:
    1,252
    Location:
    The European Union
    You need a label printer. To be legal your motor needs 250 W stamped on it. That is basically the major difference between the two motors. If you really must you can set the Max Amps to 15 A instead of 18 A. Most people who have 250 W motors have set their Max Amps to 18 A...

    You have a labeling problem not a technical problem.
     
  3.  
    Fordulike

    Fordulike Pedelecer

    Joined:
    Feb 26, 2010
    Messages:
    2,850
    Likes Received:
    697
    Location:
    Tyne and Wear
    This is a duplicate thread that has been started in the wrong section.
    Here's the current active one.

    http://pedelecs.co.uk/forum/threads...-programme-settings-please.26852/#post-357393
     

Share This Page