ECR30 mods?

[Darryl Milligan]

I was wondering if there were any mods or customisations that can be made relatively easily to the Ebco ECR30? I am particularly interested in removing the 4mph limit on the "walk assist" button, effectively turning it into a throttle up to the 15.5mph limit.

 

[Nealh]

The walk assist is probably programmed in the lcd panel (if fitted ) and/or the controller one or both may not allow it, with the lcd its a case of looking in the settings. If has led panel then no change can be made. A new controller and matching LCD from BMSB or may be some one like Panda can be retrofiited to over come this, cost 50 - 100 quid.