For some reason the throttle on my Powacycle has stopped working!
Opened up the control panel and there were loose connectors.
Yes some of the connector block had snapped off at the locking catch. Cheap chinese crap!
Does anyone have a full wiring diag for a Powacycle loom.
Pedel assist is working as normal, any ideas?
EDIT - problem sorted the blue/brown connector from throttle loom goes to the black/blue controller unit wires.
Still not impressed that the plastic connector has broken and the bike has been well looked after. I might expect this from a brittle 10yr old component but not a new one.
Opened up the control panel and there were loose connectors.
Yes some of the connector block had snapped off at the locking catch. Cheap chinese crap!
Does anyone have a full wiring diag for a Powacycle loom.
Pedel assist is working as normal, any ideas?
EDIT - problem sorted the blue/brown connector from throttle loom goes to the black/blue controller unit wires.
Still not impressed that the plastic connector has broken and the bike has been well looked after. I might expect this from a brittle 10yr old component but not a new one.
Last edited: