Hey guys,
I made a 52V battery out of tested laptop batteries.
Battery chargers to 58.8 which is perfect.
I have hooked a BMS up which is all connected properly, when it gets to 51V on my handlebar volmeter the LCD display goes off and the voltmeter dies. When I switch it back on it fluctuates to 10-20-30v then goes off again.
Is it something to do with balancing ?
Bad cell ?
Settings on the KT LCD5 display ?
Little bit stuck.
Be great if you guys could point me in the right direction I’d be very grateful.
Thank you
Nathan
This is the BMS I have got - https://m.aliexpress.com/i/32977028591.html 30A
Battery pic 1 - https://ibb.co/2KbKJxW
Battery pic 2 - https://ibb.co/5F8HGMz
I made a 52V battery out of tested laptop batteries.
Battery chargers to 58.8 which is perfect.
I have hooked a BMS up which is all connected properly, when it gets to 51V on my handlebar volmeter the LCD display goes off and the voltmeter dies. When I switch it back on it fluctuates to 10-20-30v then goes off again.
Is it something to do with balancing ?
Bad cell ?
Settings on the KT LCD5 display ?
Little bit stuck.
Be great if you guys could point me in the right direction I’d be very grateful.
Thank you
Nathan
This is the BMS I have got - https://m.aliexpress.com/i/32977028591.html 30A
Battery pic 1 - https://ibb.co/2KbKJxW
Battery pic 2 - https://ibb.co/5F8HGMz