Hello,
I've got a double hall pedal assist sensor (all in one unit) as shown in the photos.
There appears to be a gap between the left pedal arm and the sensor itself, which is causing intermittent power. I have tried to move it back and as close to the pedal arm as possible, but due to general riding, the vibration of the bike causes the sensor to move away from the pedal arm.
I don't think it's a defective sensor, as the power is produced when there is no gap between the sensor and the pedal arm, although this can be intermittent also.
I'm after some help and would ask if anyone can suggest a solution, as an alternative to buying a new sensor? I've been reading your forums and have found it very useful with some excellent advice.
Thanks in advance.
I've got a double hall pedal assist sensor (all in one unit) as shown in the photos.
There appears to be a gap between the left pedal arm and the sensor itself, which is causing intermittent power. I have tried to move it back and as close to the pedal arm as possible, but due to general riding, the vibration of the bike causes the sensor to move away from the pedal arm.
I don't think it's a defective sensor, as the power is produced when there is no gap between the sensor and the pedal arm, although this can be intermittent also.
I'm after some help and would ask if anyone can suggest a solution, as an alternative to buying a new sensor? I've been reading your forums and have found it very useful with some excellent advice.
Thanks in advance.
Attachments
-
5.6 KB Views: 26
-
8 KB Views: 25
-
1.2 MB Views: 27