Recent content by alan from eston

Right i'm back with a update, Pro rider Mobility sent me a new pedal sensor that solved the issue, when i checked the old one i found one of the wires had snapped inside the sensor but due to the fragile connectors it could not be repaired as the other connectors snapped off while the thing was...

I've just checked continuity on the sensor wires and on the red and black pos and neg wires i got zero, so i checked on the one that works ok and got a reading of 17.93k ohms so it looks like a broken wire. does this sound about right?

As mentioned in a previous thread i have just fitted front wheel e kits to mine and the wifes bikes and all was working ok, I have now tidied up the wiring and got the controllers fitted in the carrier boxes but now one of the bikes has lost pedal assist. Everything else is working ok the led...

I cannot see any thin wires just the thick pos and neg wires, i cannot see how the light could work i don't want to open the battery pack so i will just fit a seperate led light.

Those brackets look the business but my wheels have keyed anti rotation washers fitted on the inside of the forks and the spindles are round where they pass through the drop out so the external brackets would not fit.

My 2 new kits arrived last week from Pro Rider, there were a few small niggles but these were sorted promptly and I fitted the kits to mine and the wifes bikes, We are both in our late sixties and bought the bikes from Halfords several years ago but due to dodgy knees and arthritis the bikes...

I assumed the light would come on with the main switch because there are no connections from the battery other than the pos and neg connections so i couldn't figure out how it would be switched by the controller. the batteries are under warranty and have a anti tamper sticker so i cannot open them.

Thanks for your reply, the only switch i can see is the main switch and the push button that illuminates the meter I have led panel not lcd here are some pics

Newbie with my first question I have just purchased two electric bike kits with the rear carrier mounted 36v 10 amp flat batteries with what appear to be built in tail lights but the lights don't work, should they come on when the battery is switched on or are they just reflectors? thanks for...

Hello fellow E-bikers, I only discovered e bikes at the caravan show two weeks ago and decided i would get a couple of kits for me and the missus, We are both old codgers in our late sixties and dodgy hips and knees are making walking any distance for exercise difficult, we already have a pair...