Recent content by brugospals

Hi Tedvin, Glad to hear I'm not the only one going crazy due to the pulsing! I previously owned an Ecoride City from 2013, and the controller on that didn't seem to limit at 25km/h when the battery was fully charged. It gave assistance pretty much up to about 30km/h and tapered off: no pulsing...

I've thought about this some more whilst I've been away, and will hold off with any modifications - at least until after the guarantee on the bike runs out... just in case! But thanks so much for your help and ideas - I will return to this thread in the future! :)

Thanks, I understand. I will source the resistor, follow your directions, and will report back once I have some results! I'm going away for a week today though but will do this as soon as I get back! :)

Ok. I don't have a meter unfortunately, but I wonder if it could be an idea to simply unplug one wire at a time, starting with the DSM you mention above, and see what happens?

I'm guessing that the motor sends signals back to the controller to say something like how many RPM it's doing, or, how many volts its using? I wonder if it is just a matter of finding the cable sending this info back to the controller, and disconnecting it on the circuit board? This would...

Ok - I haven't crossed anything out yet. I opened up the controller again and took a few more pictures. It's very hard to know exactly where everything goes, but I've managed to figure some things out. I made some notes on one of the pictures below. There doesn't seem to be any jumpers on the...

Hi Kaare and d8veh, Thanks for your replies. Just got in after a long day out - about 35km on the bike as well...and still feel the pulsing motion kinda like sea-sickness! It's late now, but I will go down in the morning and take some more pictures and try to answer your questions d8veh about...

No, the only external wires joined with black plastic connectors outside the controller is connection #1 (6 km/h no-pedalling throttle limiter), and the front and rear lights. This is the connection diagram. http://store.ecoride.se/EcoRidekopplingsschema2.pdf Connection #1, the 6km/h speed...

Hi again, I opened up my controller today but couldn't see the "enactment" pin. The board is tiny as you know, and feels quite fragile so I didn't dare to poke about too much or start crossing out connections, just in case... The model number is similar however. Yours seems to be LSW70A6G...

Hi Kaare, Great post - thanks for the info! I'll check my controller tomorrow. Out of interest, what brand is your bike? EcoRide? (Swedish/Chinese). Mvh from Sweden