Recent content by campbell1987

Bump

BMS battery were a nightmare to deal with, hanging up the phone, ignoring all emails and ignoring me on live chat, Ended up I had to fork out the money for a new controller as they were expecting me to pay return shipping costs just to get my money back, shipping quotes were all over £100 gbp...

Ok I'll try there, Thanks folks.. ;-)

Ok so maybe 5Kw might be too much then if it needs a motorcycle frame, What is the fastest hub motor available that would fit into a standard sized hard tail mountain bike, I don't want any hassle from the law so the less it looks like a motor bike the better, The bike will be used mostly off...

something like this

Ok so i have now pretty much completed my first e bike conversion apart from a slight fault which stops the bike starting sometimes (er 30) unless batteries left unplugged for about 12 hours, New part is on the way that will hopefully fix this fault, have to first say thanks to the help of a few...

Got on to the supplier and they think its the C961 display so are sending another, they said i should not get the C961 again so i got the C963, I can still use the bike a bit as when its left off for a long time with batteries disconnected it powers on fine but after motor is used at all then...

Anyone come across this fault before.?

Might be worth mentioning, When i got the bike home and left it a while i tried to power it on again and it worked then when i power cycled it I just got the same error again so it seems to be an intermittent fault,

Sorry not replied to this thread in a while, I just got my BBS02 motor and got it all fitted and no problems with ground clearance, I tested it all before fitting it to the bike and all worked well, first go out on it was a short test to my brohers about 2 miles away, it worked fine all the way...

Thanks, Thats it ordered, Seller of the other one messaged me saying it was out of stock anyway. ;-)

Never even thought about changing the plugs, Thanks for that.. ;-) I'm currently using it with 1 atx power supply 12v supply, i have a WEP 3010 bench power supply but it recently stopped working, Going to use 3 x atx power supplies and use the 3 x 5v rails in series for 15v 30A. Also just...

ok ill get the 0961, And i already have this http://www.ebay.co.uk/itm/131354096353?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT I was just planning on using it to balance charge them both at the same time. I have a pile of about 6 or 7 dead imax b6's...... all fakes. Not buyin...

Also just realised i had to pick a display with the BBS02, which one is best and ill send PM to them now C961, C963 or C965

I just bought them there now, It said somethin about back order and 7 - 30 days wait, Ill need to wait on motor arriving too so hopefully it doesn't take too long, Was thinkin if the motor comes first i could put the 2 bulky 24v packs i made in a backpack and just run a wire from there to the...