Recent content by daverave

i tried wiggling the motor cable but it did not provoke the fault,i also tapped the cable with a piece of wood but still the fault didnt appear,but sometimes if the bike was shook a little then the E42 would flash on the screen

I pulled the cable connector apart and checked the pins and socket and sprayed switch cleaner but problem still persists.

I bought a secondhand carrera vulcan e bike with a e42 fault,and the fault is intermittant ,if i switch the bike on say for a few mins and is stationary the bike is ok then suddenly the e42 starts flashing on the screen,so i turn off then on again and no e42 fault !!! then later fault starts...