Recent content by erian

They said that some of the components consumed more power. This was not a kit but I paired the controller with bits I had (throttle PAS etc) so they said it's something of the components doing this damage probably the throttle or the screen. Could this be the case? Faulty batch is unlikely. The...

that must be the 5V resistor thats blown on the right. Any idea what might have caused that problem? will soldering a new resistance solve the problem?

so i opened the controller to see any damage. both the new and the old controller looked like this

Long story short. I have got a hailong battery cradle controller from eggbikes.co.uk. to replace the old similar controller that was giving me an error 30 message. the bike on the stand worked fine, PAS reacted and started the motor, throttle worked also . As soon as i got on the bike the PAS...

Next time, choose the motor with winding code that suits your requirements better!!!! I am trying to figure out pretty basic kids play stuff. If you want you can just neglect my questions. I assume from your answer that the capacitors are not 63V. well, what about 36V 500w Bafang BPM2 wheel...

https://drive.google.com/open?id=1gVz-0Rn345_UUlVPahldmQdkGQg-O9dV Also any information on what Voltage are the capacitors in the controller (pic)?

Hmm I have found a pretty used but cheap 36V 500w Bafang BPM2 wheel. Will it be paired OK with the 36v 18A controller Woosh??

thanks!

I guess you are talking about changing the speed limit setting? I have the kingmeter J-lcd, will it be any different?

Hi everyone, So here is the thing. I live in Denmark. Denmark consumes a lot of beer and is flat. Flat like you've never seen before. We call big mountain a hill of 200m above sea level. I commute to work every day a distance of 35km ( one direction). A flat thing where you can easily maintain...

Hi everyone, so here's the thing. I have ended up with a problem i did everything to avoid, but my memory failed me miserably. i bought an mxus 135mm rear hub motor 250watts to fit on a frame i bought and have used as a city bike (130mm rear dropouts, 6061 triple butted aluminium). Before i...

in the thought of converting both my bikes just for the fun of it, any thoughts/feedback on this Tongsheng TSDZ2 woosh?? I have looked a bit around, havent found much to be honest. It looks good with the torque sensor tho

thanks much woosh, I think I ll wait and go for the 28inch XF08C with the HL1260 controller. Untill now it seems to be the most convenient fit. And the 13mAh bat looks it can pretty much cover very conveniently my distance needs.

hmm I guess by normal bars you mean the 22.2mm diameter ones. Then i just have to decide that my genesis commuter is more compatible with retrofitting. About the Tongsheng, I wouldnt like to ditch my gears so I would avoid a mid drive... But even with the genesis some of my questions...

Pretty good pack, I have a couple of questions. This will go on an old aluminium CX bike with drop bars and disc brakes. Could any other magnetic brake sensors work with it? The shifters are for 7 or 8 gears, I have 8 gears now, is this freewheel compatible with 7/8 gear shimano cassettes...