Garry Hallam's latest activity
-
GGarry Hallam replied to the thread Motor Id.I just managed to stretch the frame from 135 to 157mm in two steps half/half. The flange offset is now about 5mm. Just need to file a...
-
-
GGarry Hallam replied to the thread Motor Id.Makes perfect sense. As it is, the off set in the flanges is 10mm. I am going to make a spacer of say 5 mm to stay in tolerance. It is...
-
-
GYou can't entrails the spoke flanges by doing anything to the frame. If you sprung one side more than the other, the wheel would point...
-
GGarry Hallam replied to the thread Motor Id.I Have also ordered some Disk brake adapters. 10 for £12.60 from Amazon (Not worth grinding a threading tool for my lathe at that...
-
GGarry Hallam replied to the thread Motor Id.I am sure I will need to spring the frame. I normally do it 50/50. Is it not possible to do say 60/40 to centralise?
-
GCheck that it firs first, then check that the two spoke flanges are not more than about 6mm off-centre.
-
GGarry Hallam replied to the thread Motor Id.Thanks, I'm gonna put it on my Rocky Mountain ETSX70
-
GT That's perfect for a 26" wheel restricted to legal speeds at either 36v or 48v. It would also work OK on bigger wheels, but on a...
-
Gfwiw i found my manual confusing and just started to cycle through the 5 or so options until it worked..
-
GGarry Hallam replied to the thread Motor Id.Just tested it with rpm phone app and it seems to be 230rpm.
-
GGarry Hallam replied to the thread LcD Display.I think it was a combination of a few settings but seems just fine now. Thanks all
-
GGarry Hallam replied to the thread Lifepo4 Cells.I just feel It is the lesser of two evils for me, for all of the same reasons you mention!
-
GThanks for the account of your experience. Yes - you can get some pretty big LifePo4 cells with screw fixings. I kind of fancied the...
-
GGarry Hallam replied to the thread LcD Display.Think i figured it out. Altered some settings. I have the pedal sensor working intermittantly. Think i need a reset and count the...
-
GGarry Hallam replied to the thread LcD Display.It was the LCD4 that I ordered. It arrived today. Pedal sensor will still not work. I went through instructions and after setting top...
