Garry Hallam's latest activity
-
GGarry Hallam replied to the thread Lifepo4 Cells.Thanks. I found and ordered one for £8
-
GI did the p3 and c1 values as you said, but again the pass did not activate. I also checked that the pas inserted correctly.
-
GGarry Hallam replied to the thread LcD Display.In that case this lcd is not compattable. There are no settings
-
GGarry Hallam replied to the thread LcD Display.Whilst iI am waiting for a LCD3 I tried the Kt controller on a compatable 880 LCD that I ordered as a spare. Got it connected up but the...
-
GGarry Hallam replied to the thread Lifepo4 Cells.Yes I meant for setting up. I will of course use a dedicated lifepo4 bms as. In the case of a 36v pack It is possible to buy a 13s bms...
-
GHas anybody had any experience with Tipsun lifepo4 Chinese cells. I ordered some screw terminal 32700 6000mah to experiment with ? I...
-
GGarry Hallam replied to the thread LcD Display.Thanks for all your input. What a great learning resource this place is!
-
GOne can add LCD 9, 11 + the TF1 & 2 now as well.
-
Glcd10? OK, I will get my coat..
-
GLCD1 should be avoided - limited settings LCD3 is standard and does it all LCD4 is small and discrete, but the buttons are too small for...
-
GThere is a thread here that I started about the new KT-TF01:- https://www.pedelecs.co.uk/forum/threads/new-kt-display.47987/#post-729913...
-
GMy default LCD for any KT controller is LCD3.
-
GGarry Hallam replied to the thread LcD Display.Thanks
-
GWhat displays are you using with the KT controllers 36/48v 15a?
-
GYou can get a 24v/36v dual voltage one from Topbikekit.
