Recent content by gazz

i've got 15 mm, the chain can probably go right another mill or so before it catches the side of the swingarm tunnel it runs through, if i have to, i'll cut a small part of the outer swing arm out for the chain, but, i was measuring from the edge of the nut that secures the crank into the BB...

That's something i need to check, thanks to reminding me,

I am thinking about 2 of them my self, one for my giant revive semi-recumbent, and one for the GF's hybrid style bike, My bike should be no probs, has a 7 speed nexus hub and a 48t chainwheel atm, but my GF's bike has derailleur gears with a 3 wheel crank, would have to loose the 3 wheel crank...

Thanks for the welcome guys n gals :) RE: the computer, i honestly think my chances of ever locating one is less than zero, this particular model of the revive was only made for a few months it seems, i've not seen another one of these N7 models other than in the original tests back in 2003...

Hi there, i've recently got back into riding a bike, gave up many years ago due to joint and back problems, was considering a recumbent, but wasn't sure, especially at the prices they go for, Then i discovered the giant revive, managed to get one that was bought along with a few others...