Recent content by Markdd

  1. M

    Controller and display recommendation

    Yes I commute daily and don’t have a car so paid £62 for an lcd3 which I should have tomorrow from Amazon I quite like the idea of wired control or I would have opted for a cheaper model once again thanks
  2. M

    Controller and display recommendation

    It always pays to ask your advice has been superb many many thanks kt display on the way cheers
  3. M

    Controller and display recommendation

    Please find attached
  4. M

    Controller and display recommendation

    That’s brilliant thanks yes it’s a yellow pas 3 pin connector; if I give you the full story :) I bought a controller which happens to be a cheap kt one (by accident; just looking for the right connectors) and connected it to my existing system with the new battery so everything fitted great and...
  5. M

    Controller and display recommendation

    Sorry for my lack of knowledge but my current system engages the drive when I peddle through the pas magnet sensor on the crank is this the same ?
  6. M

    Controller and display recommendation

    Changed my battery I’d like a controller and display that used the waterproof connectors ie 9 pin motor 3pin pas currently 8 pin display which includes throttle 2x brakes can anyone recommend a system thanks; my current is built into the battery case so want to go more generic everyday commuter...
  7. M

    36v 12ah battery what gauge wire ?

    Brilliant thanks for your help
  8. M

    36v 12ah battery what gauge wire ?

    Yeah thanks my battery wires “look” 1.5mm but my controller “look” 2.5mm and I believe 2.5mm is equal to 14 awg just wanted to make sure
  9. M

    36v 12ah battery what gauge wire ?

    It’s looking like 10-15cm controller is rated at 8a thanks for the reply
  10. M

    36v 12ah battery what gauge wire ?

    Hello need to extend my battery cable to connect to the controller it’s a 36v 12ah battery for a 250w motor what gauge please thanks
  11. M

    Battery connector

    I have purchased a new 12ah 36v battery and would like to use a waterproof connector so I can easily disconnect the battery from the controller ideally a nice big 2 pin connector as my hands aren’t the best I’ve been looking at flex connectors ie lawn movers but are only 10a anyone recommend one...
  12. M

    Standard bottle battery ?

    Yes it's in the base I'm opting for a separate controller and battery thanks for the replies
  13. M

    Standard bottle battery ?

    Thanks for the help; my only concern is that the controller is in the base of the battery holder so it's probably time to swap the lot and get a separate controller and a battery at least it will give me options going forward; appreciate your help though many thanks
  14. M

    Standard bottle battery ?

    That's great thanks so just need 5 contacts thanks for the info greatly appreciated