Recent content by rogers827

https://www.facebook.com/marketplace/item/1151791463141812/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3Acec807cf-f5ea-4386-9ac9-1877bd550602

They may have done . Hopefully someone on here can advise.

rogers827 submitted a new listing: 36V Panasonic Battery wanted for Kalkhoff, Flyer etc. - 36V Panasonic Battery wanted for Kalkhoff, Flyer etc. Learn more about this listing...

Hi, you say the batteries work great but have you done a capacity check? To test the capacity hold down the test button. You will get a number of lights that show the charge state. If you keep he button held down, you will get a 2nd set of lights. The 2nd set show the remainging battery...

Hi, I have a Crossfire II with the dreaded E42 motor error. I also have a spare working Crossfire 1 motor wheel. The problem I have is that the Gen 1 motor has sockets for female pins in the motor side connector & the Gen II motor has Male pins in the same motor connector. I therefore have 2...

Hi, just as well you returned the motor as it was a 36V unit & your 2008 vintage Kalkhoff almost certainly has a 26V motor and system. Additionally, if you found the right 36V battery, it would be to big for the 26V cradle. There is someone breaking a 26V Kalkhoff bike on FB if you are still...

I needed to replace the freehub pawls on my HESC motor so took this advice from atiiiae90. Unfortunately, the kit is not a direct replacement for the model of moter that I have. The profile of the pawls is correct but they sit about 1.5mm proud when fitted. I had to dress them down somewhat...

Hi & thanks for the response. Unfortunately I do not have access to the bike so can not take the requested readings. It is a bike I am thinking of buying to repair but the seller has stopped replying to my emails. If I get any further I will let you know. Regards

Hi, did you ever get to he bottom of the wiring connections on the Evo MU170517005 display. I have a similar problem where the main 4 wire cable has been torn from both sides of the QR plug and the colours each side do not match? Any info would be most helpful. Thanks

Looks like an ABUS lock same as here Looks like an ABUS Panasonic battery lock as shown here...

rogers827 submitted a new listing: Wanted - Panasonic 26V Handle Bar Display - Wanted - Panasonic 26V Handle Bar Display Learn more about this listing...

Hi, I have recently rescued an old Raleigh with a panasonic motor from a friends back garden. My question is, do you know where I can source/borrow a replacement handle bar controler from as the existing one is faulty? Hopefully I can then fix the switching problem & see if the motor still...

Hi, many thanks for the reply. I managed to source a replacement battery from a friend in the Netherlands, but due to Covid restrictions I have not had a chance to go and collect it yet. As I had this replacement battery on the way I fortunately resisted the urge to try a 36V feed - just as...

Hi, I recently bought a Heinzmann 24V 250W Front Wheel Motor. It was not working and would not rotate backwards but I thought I would take a chance as externally it did not look too bad & the rim & spokes were in good condition. When I opened it up & it peered inside it looked like it had spent...