Search results

Hi & thanks for the response. Unfortunately I do not have access to the bike so can not take the requested readings. It is a bike I am thinking of buying to repair but the seller has stopped replying to my emails. If I get any further I will let you know. Regards

Hi, did you ever get to he bottom of the wiring connections on the Evo MU170517005 display. I have a similar problem where the main 4 wire cable has been torn from both sides of the QR plug and the colours each side do not match? Any info would be most helpful. Thanks

Looks like an ABUS lock same as here Looks like an ABUS Panasonic battery lock as shown here...

rogers827 submitted a new listing: Wanted - Panasonic 26V Handle Bar Display - Wanted - Panasonic 26V Handle Bar Display Learn more about this listing...

Hi, I have recently rescued an old Raleigh with a panasonic motor from a friends back garden. My question is, do you know where I can source/borrow a replacement handle bar controler from as the existing one is faulty? Hopefully I can then fix the switching problem & see if the motor still...

Hi, many thanks for the reply. I managed to source a replacement battery from a friend in the Netherlands, but due to Covid restrictions I have not had a chance to go and collect it yet. As I had this replacement battery on the way I fortunately resisted the urge to try a 36V feed - just as...

Hi, I recently bought a Heinzmann 24V 250W Front Wheel Motor. It was not working and would not rotate backwards but I thought I would take a chance as externally it did not look too bad & the rim & spokes were in good condition. When I opened it up & it peered inside it looked like it had spent...

Thanks for the reply. I know where the wires are positioned on the battery plug & bike socket but because the original battery is incomplete I do not know what voltage the white wire caries to the LCD/controller. That is what I would like to know?

Hi, I have recently bought a VGC but non-working Gazelle Innergy. I knew the battery did not work but when I took it apard the wires on the BMS had been cut off & half the cells were missing. I used the battery outlet socket and wired up a generic 36V battery which has powered up the LCD okay...

Hi, I am looking for some info regarding the Gazelle Innergy 36V Battery outputs. I have recently bought a VGC but non-working Gazelle Innergy. I knew the battery was faulty but when I took it apard the wires on the BMS had been cut off & half the cells were missing. Using the battery outlet...