Recent content by Rustproofhawk

  1. R

    O6 info code?

    Yeah that makes sense, I should have a meter really, got all the other tools for mechanical stuff but never really touched electrics until now Thansk for your advice, I'll check the controller out to be sure and if that's the case, just buy a new one and tape up the motor wire
  2. R

    O6 info code?

    Ah I see, annoyingly I don't have a multimeter to hand. But assuming there is a blown mosfet, is it worth just buying a new controller?
  3. R

    O6 info code?

    So I got it apart no prob, turns out like I suspected the wire has been damaged, exposing enough of the inner wires, causing them to short. I decided to open up the controller to see if that had any signs of short circuit, nothing I can see by eye and the display still reads 06 info with the...
  4. R

    O6 info code?

    That's where I think it is, just need to get it apart and have a look. Am I right in thinking the casing should prize off once the screw are removed
  5. R

    O6 info code?

    I think the damage to the wire will be on the motor end of the wire. I need to pull the casing off to see if it's damaged inside the motor, the connecter end seem to be fine
  6. R

    O6 info code?

    Ah ok great. I'll pull it apart and see what I can do, i might just order a new motor if it looks a pain I have 52v 21a Panasonic battery so power isn't a issue, I also have torque arms but didn't have one side fitted on my test, I have realised how much power this has now and the arms are a...
  7. R

    O6 info code?

    Thanks for your reply, I have a feeling it's the motor wire, so I'll try your test later to confirm. Is it possible to fix if that's the case? Pop the motor open and 're solider the wire? Or is a new motor needed?
  8. R

    O6 info code?

    Hi guys! I'm new to all this ebike stuff and decided to convert my mtb in a 1500w ebike, seems easy enough but I had a few testing issues getting the wheel to fit and I span the wheel by accident whilst modifying the bike upside down, it wrapped the wire around the axle and now I have this...