saneagle's latest activity
-
saneagle replied to the thread Modifying to Torque Sensing.The KT controller is what I always recommend for a hub-motor. No need for a torque sensor, as it doesn't offer any advantage. The KT... -
saneagle replied to the thread Modifying to Torque Sensing.You can get 17A and 20A KT controllers the same size as the KU65.
-
saneagle replied to the thread Front of bike (headset or suspension) doesn't feel right.It's getting complicated now, and you forgot the spokes. Let5try and make it simple: Grab the top of the front wheel and pull it side...
-
saneagle replied to the thread Engwe c20pro controller replacement.Your controller has a long motor cable attached. That's not normal. When you get a replacement, you'll need to buy a motor cable too...
-
saneagle replied to the thread Front of bike (headset or suspension) doesn't feel right.Good points, well presented! Just to expand on the second one, the spacer arrangement should result in a way where the cap remains...
-
saneagle replied to the thread Front of bike (headset or suspension) doesn't feel right.With the stem clamp bolts released, you tighten the cap screw until you can feel a little tightness in the bearings when you turn the...
-
saneagle replied to the thread Swytch MK2 (Air) motor — want to reuse with KT controller + battery — advice needed!.I'm not sure about Parkside batteries, but most like that don't have the necessary safety controls. They rely on the unit they power to...
-
saneagle replied to the thread Kalkhoff from the past - my voyage of discovery and wallet emptying.Our longest forum member made this information for you. I haven't looked at it for many years, but there is a lot of good information...
-
saneagle replied to the thread Modifying to Torque Sensing.Any KT.
-
saneagle replied to the thread Modifying to Torque Sensing.It's not the sensor that does that. It's the power algorithms in the controller. A cadence sensor with speed control is really bad for...
-
saneagle replied to the thread Capacitors in KT Controller blown.The big resistor only supplies the power for thelogic side of the controller and the sensors - PAS, throttle, halls, speed. If it burns...
-
saneagle replied to the thread Battery Fires.I have no evidence, but I have a strong feeling that it's all linked to the increase in ebikes being used for deliveries and drug...
-
saneagle replied to the thread Capacitors in KT Controller blown.It's just a spark due to the high current. You get the same when you connect a live battery. It looks and sounds bad, but it's pretty...
-
saneagle replied to the thread Capacitors in KT Controller blown.Shorting the wires without the battery is not harmful and it doesn't send any current goes through the shunt. Shunts are normally 0.005...
-
saneagle replied to the thread Modifying to Torque Sensing.It makes no difference what type of motor or where the motor is. It's all down to how good the algorithms in the controller are. Your...