saneagle's latest activity
-
saneagle replied to the thread programming an egg rider for a mycle cargo bike..Is it compatible with your controller? -
saneagle replied to the thread Help! E-scooter battery and controller to an eBike front hub motor.There should be 3 combinations that give the correct forward motion and 3 that give smooth reverse direction.
-
saneagle replied to the thread Coyote connect..You can use any number of magnets you like. It makes no difference. It's probably best to avoid one with 12 magnets because they give...
-
saneagle replied to the thread Battery Fires.Maybe if you look to see what happens, you can see. Switch your battery on and the charger off. Check that the charge port is live...
-
saneagle replied to the thread Battery Fires.It's only a problem with the 5.5mm Jack's.
-
saneagle replied to the thread Carrera e subway.Motor defect (07) is normally high current through the phase wires because of a blown MOSFET, short in the motor cable or burnt motor...
-
saneagle replied to the thread 48 V Bafang KT Build.The thing is that bikes complying with EN15194 are exempt from needing licence, registration etc. If your bike doesn't comply, then it's...
-
saneagle replied to the thread Battery Fires.The problem is that the first spark can destroy the battery, like it did with mine. I was able to replace the jack socket, but most...
-
saneagle replied to the thread Carrera e subway.Try disconnecting the hall sensors, then try sensorless mode to see if the problem goes away. Some dual mode controllers always check...
-
saneagle replied to the thread Ebike News.Regarding the above post, it's this bit that's incorrect. Virtually no OEM electric bike would be legal if it were true. There is no...
-
saneagle replied to the thread Battery Fires.First, let's determine what you have. Do you have to switch on the battery in order to charge it? If you do, what he says makes more...
-
-
saneagle replied to the thread Replacement battery for Christiania.the wires you mention are for the controller, which sits in a compartment at the front of the battery mount. Functionally, it's...
-
saneagle replied to the thread 48 V Bafang KT Build.They're not necessary. Small hub-motors with plastic gears, like AKM 100 can do 15A at 48v with no problems, provided you don't use the...
-
saneagle replied to the thread Battery Fires.People sometimes haven't a clue what they're talking about. Maybe he just got appointed to the job and did an Internet search to come...
-
saneagle replied to the thread Cyclotricity kit, no Pas but throttle works..Pedal sensors are very simple and all work the same. There's a hall sensor that's supplied by 5v (2 of 3 wires), and when a magnet...
