saneagle's latest activity
-
saneagle replied to the thread Help! Giant Twist Lite - repair/ride without battery/scrap?.You can probably use any battery you want, but to be sure, you need to locate the controller, and check to see how many wires the... -
saneagle replied to the thread Battery BMS advise or input sort.Not in their eyes. They'll ask the manufacturer (eg Suntour), what they think of your modification. They'll simply say that it's unsafe...
-
saneagle replied to the thread Battery BMS advise or input sort.You will never get a certificate of safety for a battery after you've downgraded the safety controls in it or substituted it for one...
-
saneagle replied to the thread Battery BMS advise or input sort.The comms is completely within the BMS. The charger and battery exchange information on whether conditions are right to charge, and if...
-
saneagle replied to the thread 48 V Bafang KT Build.It's both. I fact it's a case of either/or, depending which one cuts off first. You set the charger to a maximum of 54.6v, so it can't...
-
saneagle replied to the thread Battery BMS advise or input sort.I think you'd be OK repairing fuses in a battery or re-joining wires that became unsoldered, but if you swap a BMS with comms to one...
-
saneagle replied to the thread Cyclotricity kit, no Pas but throttle works..Aliexpress is cheapest, otherwise loads on Ebay and Amazon.
-
saneagle replied to the thread Cyclotricity kit, no Pas but throttle works..You already have the right controller. You just need to chance the LCD to any one from KT except LCD1, which is what you have. LCD3 is...
-
saneagle replied to the thread Battery BMS advise or input sort.I do battery repairs as favours for people that need them. I never charged anybody for it because of the liability issues - and that's...
-
saneagle replied to the thread Help! E-scooter battery and controller to an eBike front hub motor.There's a setting in the LCD where you can change the throttle from scoot to start to normal twist and go. There's a Youtube video from...
-
saneagle replied to the thread Battery BMS advise or input sort.Whilst what you're proposing will probably work, you're leave yourself wide open to a lawsuit and/or potential prosecution if you sell...
-
saneagle replied to the thread Help! E-scooter battery and controller to an eBike front hub motor.Maybe it would be better if you explain exactly what you mean. Everybody is trying to guess.
-
saneagle replied to the thread 48 V Bafang KT Build.You chose a solar charge controller that has an adjustable charge voltage, and set it to 54.6v, or if your solar panels don't go that...
-
saneagle replied to the thread 48 V Bafang KT Build.It depends whether a crank motor or hub-motor and the motor's winding speed (Kv). Ideally, you need a motor that maxes out at around 1.3...
-
saneagle replied to the thread Coyote connect..The sensors have two parts - the magnet disc and the sensor. The two parts come as a pair. You replace them both, though some magnet...