saneagle's latest activity

  • saneagle
    saneagle replied to the thread Modifying to Torque Sensing.
    It depends on the controller, but I can give you a rule. Measure the voltage on the white wire coming out of the controller when it's...
  • saneagle
    saneagle replied to the thread Carrera Vulcan E Bike E42 Fault.
    Check the motor connector under the left side chainstay.
  • saneagle
    saneagle replied to the thread More Seizures.
    The photo shows a normal Carrera with Suntour HESC system, including the chainwheel torque sensor. I wonder what they did to modify it...
  • saneagle
    saneagle replied to the thread Yose power.
    The 350w one spins faster than the 250w one, which is the last thing you want for towing a trailer or riding off-road. The 350w one...
  • saneagle
    In the last three months, gold has risen 6.39% and silver 4.29%. In actual fact, gold never changes in value - it's the currencies that...
  • saneagle
    saneagle replied to the thread More Seizures.
    This is how it works in London and in most cities and large towns: Illegal migrants flock to Britain for ‘easy money’ food delivery jobs
  • saneagle
    saneagle replied to the thread New Project Started.
    Very slow because my trainee is not putting in enough time.
  • saneagle
    saneagle replied to the thread Help! My next project.
    My Q128 was pretty powerful at 14A. i was happy at that for ten years, then I tried 22a, which is too much. That's at 48v. The point I...
  • saneagle
    What happens between Israel and Iran is nothing to do with Trump. The deep state big boss has been after Iran for a long time. UK is...
  • saneagle
    saneagle replied to the thread Modifying to Torque Sensing.
    You can get special 3-wire ebike ones that are relatively expensive unless you buy them with the controller from a Chinese supplier, or...
  • saneagle
    You must show us a picture of the control panel so that we can see which one it is. The flashing is an error code. When we know which...
  • saneagle
    saneagle replied to the thread Modifying to Torque Sensing.
    Yes, that sounds good. Occasionally, there isn't a speed sensor in the motor, so the white wire isn't connected, in which case you need...
  • saneagle
    Thanks for the update. That looks pretty bad. I'm still not sure about your battery. In particular whether it needs the comms to stay...
  • saneagle
    I told you that I'd revisit this, like I did last time you said the same. In the month after you said similar in April, when you said...
  • saneagle
    saneagle replied to the thread Modifying to Torque Sensing.
    A three pin connector on the motor means that it's sensorless and you need a sensorless controller. I don't quite understand what you're...