Sparksandbangs's latest activity
-
SSparksandbangs replied to the thread Help! My next project.It is unlikely that the firmware would remain the same over time. C15 parameter has been added, who knows what else. If it has never...
-
SSparksandbangs replied to the thread Help! My next project.Yes, must be my lying eyes or hubris maybe.
-
SSparksandbangs replied to the thread Help! My next project.After three runs with a different controller and with all other components the same there has been no replication of the fault. I'm...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Moved it to 2500 which is a cadence of 16. Probably gone too far. Only one way to find out.
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Assuming I've got the maths right. Previous setting of Ramp end was 1000, 12 pulses per rotation, so a cadence of 40rpm before full...
-
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Fixed the assist indication on the display. Now works and blinks when the pedals are rotated. Finally starting to understand the PAS...
-
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Rather boringly it disables the watt meter until a series of actions have been carried out. It then remains on until the power is...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I've had another look at this and the setting only appears to do something with a torque sensor. I don't have one so it can't have...
-
SSparksandbangs reacted to guerney's post in the thread Lishui Controller Modification - Firmware Flash Project with
Like.
That's the spirit! Share the Lishuwow! Can't stop an idea whose time has come etc. This forum is teeming with hub motorists, and... -
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Changed the PAS Impulses per turn to 12 from 32. Absolute pants. Changed it back. Will investigate further later what this setting...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.There are plenty of other things to sort out. I get the feeling the the KT displays have not been widely used with this firmware, so...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.28mph on the downhill, pedalling through the V and on the up hill and...works as expected. As soon as you drop below the set point power...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I now have a fairly good idea which parameters from the Kunteng display actually do anything. The assist level is transmitted to the...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Good question. I have my 28mph downhill followed by a steep uphill on Monday. It will be a good test. This will be the first time that I...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Previously I'd set the wheel circumference by measuring from the floor to the centre of the hub, multiplying it by 2 and then by Pi. As...
