Sparksandbangs's latest activity
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.The legal settings are the same. 6kmph without pedalling. Pushing the throttle while pedalling gives a graduated output though. Push...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.That's not how it felt. Maybe the torque simulation is more nuanced, who knows? Well maybe someone on the German forum but that would...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.As it stands these are my initial feelings on the Lishui controller compared to the KT. Positives - Graduated legal throttle rather...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I have experimented moving P1 up and down but it makes no difference. It could be it's not mapped from the display to the controller. I...
-
SSparksandbangs replied to the thread Crank removal.Thought the Amazon link I posted earlier was pretty near. 5mm out. I could be wrong though. If someone else wants to confirm...
-
SSparksandbangs replied to the thread Crank removal.Top picture on post #58. I reproduced the picture. FP-B917/9N L: 135.5 C:29 L< 84 >R BC 1.37"x24T
-
SSparksandbangs replied to the thread Crank removal.An 84 140. I'm sure someone else will be able to do better...
-
SSparksandbangs replied to the thread Crank removal.I maybe being stupid by the picture posted has 84 where it usually says 68. I'm well out of my knowledge range here so will leave it to...
-
-
SYay this tool did the job . I bought a set of these when I was working on the motor and needing to remove the gears which had circlips...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Practically. More connections will need soldering and the controller will need securing in the enclosure. At the minute I've just duck...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.Had a look through the code for the LCD3 and noticed that a section had been commented out that related to external speed sensors. The...
-
SSparksandbangs replied to the thread Crank removal.Throw the lot in the bin and buy another one. They are about £2.
-
SSparksandbangs replied to the thread Crank removal.That happened to me. I stuck the bottom bracket in a vice and used a set of stillsons on the knurled ring. Ended up with a couple of...
-
SSparksandbangs replied to the thread Crank removal.I'd definitely go for the saw looking at that but I do have a habit of using brute force and ignorance. There may be a better way. Cut...
-
SSparksandbangs replied to the thread Crank removal.Four ways off the top of my head. Bike shop Nipple extractor if you can find the right size. Penetrating oil soak night before...
