Search results

Hi all great news for me, I went to great shop in Swindon, and they provided me a new controller to take home and test, and it worked the same as my old one. So I have ditched the lead batteries now and fitted a new 400Watts battery designed for the rear of a normal bike in a rack, and I have...

thanks so today I did a 4.3mile ride on it (towing) no use of the throttle, on LOW mode and even after 2 miles I was still on 4 leds, then 200 yards from home I went from 3 LEDs to 1 blinking LED and I popped the multimeter on and it says 44.7 Volts and 2 cells we 14.xx and one was 15.x. So...

yeah you are probably right I will get one made up - just emailed this guy in northampton 173701363297

so is the consensus to go with a 18650 cell pack over the batteries I have got? if so I might try building my own (depending on the cost of a welder.

Hi all I have now done 400 miles on this bike now and I love it - I would buy it again it gives me wings unlike red bull. Motor - The only issue I have had is a squashed sensor wire, it got pinched by the motor mount and was stretched when the rear suspension was compressed. Oddly though it...

I had to take my motor out recently to rewire my Speed sensor cable I struck me a bit odd that I have a carbon shock link and Titanium skid plate bolt but nasty steel motor bolts, has anyone sourced Titanium motor mount bolts? I reckon I could save about 100g at least?

Cheers buddy can you tell me which type of Lions I should be shopping for?

thanks you might be correct as it recharges to full very quickly - less than 2 hours I suspect - but I will monitor it this afternoon to be sure, also I will check the voltage when it thinks it is flat. What I do notice is that the battery @monitor (which is 4 red less for full) goes from 3...

Hi all I have been using this for a couple of months now and it works perfectly for what need. but due to the weight of the total rig and although I pedal it and only use the Medium Power setting I am only getting 3 miles range.- I don't use the throttle only pedal assist I know that this is...

Funny how there is no neg feedback?

How is the Bafang with no power, easy to pedal, I am used to Bosch but going to do my old hard rock with a Bafang 48v 700w, also recommend me a battery buying link

Too good to be true? https://www.ebay.co.uk/itm/Bafang-8Fun-BBS02B-Mid-Drive-Crank-Motor-48V-750W-Conversion-Trike-Ebike-Kit/192805397665?hash=item2ce418e4a1:g:pBEAAOSwpRxcTU3c

That's good but for simplicity I see Bosch hard tails second hand selling for about 1k

There are 3 issues that affect the sensor/ magnet 1 the gap 17mm max but 7to 9 MM. Is best 2 the magnet can go weak 3 the sensor wire might be damaged, ave routed mine internally with the brake hose.

i like one in westbury, same county as me, what type of Bottom bracket/cranks is it designed for. Something is flexing or my 12 magnet disc is faulty as I have a power cut for about 40% of the rotation. My sensor looks a bit naff also.

I would like to convert one of my bikes and use my Bosch in frame batterie that came with my moterra, Does anyone know of any front wheel kits that would do this ?

cheers I have removed it and there is a crack in it., so I will see if I can fit another crank and BB it as I have a spare Square/Octalink and External cranks - so any recommendations please for a new magnet disc for these cranks?

wow what a crap design- its a piece of brittle plastic thats glued on! And this was causing my lack of power on the 270deg of the cranks - so now I am investigating if the miss alignment is from the shoulder it sits on or itself and as I can see some of the crank thread I will try and find...

Hi I have just picked up a used Kentex E trike, 36V and 250W front hub motor. the trottle works fine so I know the motor and wiring are ok, BUT..... When I use it in pedal assist mode I am only getting power when the right hand crank is between 90 and 180 degrees. on close inspection the...

i reckon my hard rock would make a good base for my first diy conversion. I have a Bosch performance battery 400. So canminute any 36v kit and just wire it to a Bosch battery mount?