Search results

Hi How does the Q100H RPM handle 36V and @46V for 85+ KG rider? I saw the following speeds and comments for the NON-h Q100... (see quote below) Has anyone a similar list for the Q100H? This is what I have found with non H-versions: RPM = speed (26" or 700c wheel) 200 = 15.4 mph (verified by...

You could also consider a front hub motor and see if you could install a front rimbrake behind the fork. There is no room in front of the fork because of the front carrier. Mayby you could put the rim brake behind the front fork... the bolt is there... (Or scrap the front carrier and mount a...

Hey there Thanks for the help to both of you. I found the 40 pages long article on Endless Sphere that explains the different settings and managed to read all of it. I agree with mfj197s comment in a different note. It would be nice with a controller that could tolerate for instance a 41V...

Excellent, do I just plug this in between battery and motor and let it register the use that flows through it?

Hi guys How do you meassure/calculate how many ah you use in your rides? I have a 36V 14,5 Ah battery. It went from 42,0V to 35,0V in my last trip. Approximately 50 kilometers. Can I calculate how many ah I used based on these numbers or do I need to include/do something else?

I have just returned home from a test drive with 'Keep Current' at 90%. I feels way stronger than at 60%. I will try it at 100% tomorrow and possibly change the 'Slow start model' (ramp up) a little and raise the 'Start Current' up from 10% as well. Hahaha, I should have bought such a motor and...

Please send the link with the explanation. Why not set 'Keep current' to 100%, and then adjust the assistance level 1-9? What I would like is assitance up to 90 rpm cadance. Thereby having the motors input and putting my own pedaling on top of that, raising the top speed by +10 km/h

Hi guys I have just installed the motor and I have programmed the controller. Whenever I change the max current from 15 to 18, the display (c965) shows 11H as an error code when I stop pedalling. That indicates controller heat error. However, it is NOT a heat thing. When I switch back down to...

Hi eHomer What kind of top speed do you get unrestrictid with 328 rpm at 36V?

Can the BBS01 250W 36V 15A motor handle, that I reprogram the controller and up the amps to 18A? What is the result of this? Can the motor tolerate it, or will it destroy something?

Hi Michael That is a good question. To be honest, I read the articles about the BBS02 and I just assumed that a reprogramming was nescessary for the BBS01 aswell. I will receive the motor this week and install it next weekend. I wish to be able to drive with a speed of 40 kph, combining my...

Hi all I have just ordered a Bafang BBS01 250W. I have read up on programming the Bafang BBS02 on several links. And both settings and .el config-files are readely available for the BBS02.... But I can't find any for the BBS01?! Where can I find config settings or .el files for the BBS01 that...

Thanks Michael That's another good alternative! It works with a max 10 series and fits my batteri (36V - 10 series of 5 cells) But not with more series (48V - 13 series of 4 cells.... is a no go) ...Please keep them comming... I need two "smart" chargers (home and job), so price is important.

Hi John That is a solution with the functionality that I look for. Any similar solutions out there, but at a lower price tag?

Hi all, I am looking for at programmable charger for my 36V 14.5Ah, Samsung 29E. It would be super if it also works with both 24V, 36V, 48V etc. Also I would like it be able to switch between 2A, 4A and 6A charging. And have a shut-off-function when finished. And be able to work with 80%, 90%...

Let's hear some reports of actual use.....

Hi I want to check up on the producer of the GSM crank drive sold by Woosh Bikes. What company produces it? (Name, website etc...) Kind regards Duncan

What happens if I attach at 48V battery to the 36V PRA Direct Power direct drive setup? Do I blow a fuse in the controller or do I achieve a higher max speed? (Can the controller/setup handle it?)

How do you translate motor RPM into KM/H? 370 RPM is equal to 35 KM/H in a 20" wheel 470 RPM is equal to 45 KM/H in a 20" wheel What is the logic/math fomula behind it?

Dear d8veh Thank you for your answer to my question the other day You appear very knowledgeable and I dare to ask your advice in a tricky-e-bike-matter. The thing is, that I want to be able to switch between street legal and off-road mode, using the same motor and battery. Which parts do I...