Search results

Evening, I'm looking to change my throttle from a wuxing 130x to a 108x as the 108 looks to be more waterproof. My handlebar configuration needs a left hand throttle. I managed to find a left hand but not from my controller supplier (topbikekit only supply RH version of 108x). When I connect...

Pedals with pins and proper rubber soled MTB shoes and your feet stick like they are glued on. I wouldn’t have believed it if I hadn’t tried it myself.

Driving with headphones can be considered “driving without due care and attention” or even “dangerous driving” and can result in prosecution.

Please note the date of the post?

VFR400, have you got your P1 and P0 reversed as it seems to contradict what it says in the manual? Of course the manual could be wrong !!

Does the lock not come with a frame mount? I have the same lock and it locks very securely to the frame.

Can anyone offer an explanation of how torque simulation mode is supposed to work? The chinglish in the manual is not clear to me. I’ve tried P3/0 and P3/1 and can’t seen any obvious difference! “P3 is power assist control mode setting, when P3 parameter setting is1, power assist control mode...

Oh well, we live and learn. I’ll persevere with it and see how I get on. I can always change the LCD later if this one proves to be an issue. They’re not exactly expensive anymore

Also strange, the manual says C2 goes from 0 to 8. I can only select 0 or 1 ?

I guess so. The motor wire has 9 cores. I have changed C2 to 0 and this seems to have fixed things.

So I fitted my new controller today and changed a couple of settings based on info from here. The motor seems to be very noisy and the throttle only works intermittently and is very jerky. Could somebody more knowledgable than me have a look at the settings and see if anything looks wrong?

Very impressed with topbikekit so far(& DHL). Orders controller and other bits 10:00pm Monday night Delivered this morning at 11:00

Thanks vfr. Is there anything in the number that will allow me to identify it so I can find the number ofmagnet poles / gear ratio to allow me to set the P1’s value? I’ve looked on the shengyi site and come up blank.

Evening all, I have on order a new KT T06S controller and LCD for my bike. While I’m waiting I’m trying to figure out settings for the Motor. it’s a volt bike and has a spintech motor. The code on the side is SYA2S3626QL3019S1 Does anyone have any idea what this code signifies? I have found...

bikes4two, any idea of the physical size of this controller box? I’m also looking to change from a ‘speed control’ type controller. My bike also has all Julet connectors and this one looks ideal of it will fit in the compartment in the base of the frame.

Looks like they charge per region now. They are quite big areas so not too bad as long as you aren’t on the border of several regions.

When I bought the full region unlock it was about £20 for the whole world. This allows you to download as many regions as you like (space permitting) so you can use the routes offline without using any data. Well worth it in my opinion.

Volt are generally pretty good with customer service but can be slow with email response. You will get a faster response if you phone them. Did you buy directly from volt or via one of their ‘agents’? These are a network of local bike shops that provide warranty support for volt. If you have a...

These lighter bikes can be easily ridden away without power. I don’t think disabling the power would be much of a security benefit or deterrent to a thief.