Search results

Perhaps the RC community with their long history of using lipo batteries could benefit from your concern OP.

goto any car spares or h/w shop and ask for 'steel' or metal putty.. branding is not crucial, its not the strength but the putty like quality allowing you to mold it to a shape thats attractive for this use case. rubber is a tricky substance to glue i would avoid, drilling a thru hole where...

yeah when gluing magnets in place near ferrous metals, clip them down until the glue has cured ;) JBWELD do quality epoxy products, and they do a steel putty ?steel stick? you can 'prototype and test magnet positions with blutac and fix with the epoxy putty, making it straight forward.. its...

I urge you to reconsider fitting brake cut offs, the delay between stopping pedaling and the motor/controller reacting and cutting off power to the motor. Will significantly increase your stopping distance. Your brakes will wear significantly faster, they will anyway but braking against the...

Probably ;) just be prepared to try a few different settings and be mindful the pas may not be enabled by default.

? just use one of the sensors for the hydraulic brakes just not on the brake, glue a loop to a rare earth magnet, secure the sensor behind some steel in an accessible position and stick the magnet atop it. Use the loop and yank off the magnet in an emergency, and it will also serve as an added...

Good to hear, wishin you many many happy miles..

`Im sure the showers are much appreciated by those who need to do all the work cycling a distance ;), and rather than a replacement for insurance the lock box cost option could perhaps be considered an optional extra cost to further avoid the possible hassle of a theft. dont dismiss the 3rd...

Hang tight a week or so, its been a turbulent week or so for yose, another member reported receiving a recall notice from ebay for the yose kit he bought via them, which also started folk speculating. I suspect they are just holding off with any possibly sensitive sales in good faith to...

For a manual and instructions on set up you need to search for the display manual and not the controller .. That looks like a ktlcd-05 to me ? if so THIS! might be what you need.. the manual is in Chenglish, so take your time read and re read, and if still confused post here some of the...

Pre covid the home brew forum thbf held an annual spring thing (weekend of camping and free beer and brewtalk) - Im no longer a participant- health reasons for giving up the beer ;( but a fun weekend where folk brought all their diy brewkit for a swap-meet and how to workshops sharing tools...

I DO NOT KNOW ABOUT MID DRIVE MOTORS. However my hub drive will not cut out as soon as the pedaling stops but a few seconds later, touching the brakes with cut off sensors fitted cuts the motor Immediately!! I have also repaired a wheel that was in a rta without brake sensors, spokes were...

Where is @flecc ?? as this locking requirement from the insurer is a bit extreme is it "Reasonable" My lay understanding is things have to be reasonable in order to enable the forming of a contract ' meeting of minds' ?? tho i cant recall if that was judge judy or an actual basic law class...

Also while its called 'Pedal Assist' the way it works its more you assist the motor until it hits target speed at which point you take over completely or up the assist level/speed.

Start using the roads on 2 wheels especially at speed and you will soon know its not about how careful you are.. Staying 'legal' has little to do with plod confiscating bikes. Plod wont care until he has to after all. But has more to do with the inevitable conflict after a bump or scrape or...

Hi welcome, bikes lookin good there, hope you continue having the fun..

Depending on the controller used perhaps, but the general approach is to simply cap the speed for each level of assistance. KT controllers will allow you to limit power output instead but you would need to limit to or below standard ebike controller output levels to enable actual pedaling which...

5kg sounds about right @guerney , hefty is the word i would use..

Oxford chains are "Sold Secure 104:2020 Bicycle - Gold" if thats relevant? i use one fwiw..

Just how heavy are you? I dont meant to be rude but your linking to kits that could carry jabba the hut off at close to lightspeed . Myself @circa 100kg (last time i weighed myself was over a decade ago so probably more now?) and a good 20kg+ of shopping have rolled home uphil at 15mph...