Search results

Yes, my initial enthusiasm was fuelled by the number of pages and the settings i spotted when printing out - Its not the speed i want to change but the way power assist is applied and when it kicks in (thought i could do that with this manual but it seems not made settings change and no...

all the other parameters??? hmm

Well I emailed Yose Power support about my problems with the pas modes and my frustration of being locked out from the controller settings so they sent me the manual ;) Just in case anyone else needed to change any parameters in the JYTCON controller supplied within the 13ah battery tube mount...

Yeah the drop outs slope and ive had the drip lip instruction from a builder pal many many moons back ;) the lowest point of that cable is just before it hides behind the frame. Again its the photo angle there is no problem with the derailleur no cable/lead clashes. I couldn't take a more...

Im having similar issues with a locked up controller, Looking at your pic you have some details about the make and model of the controller try looking for alternative firmware options that have been unlocked, I couldnt find f/w for my JYTCON controller so I threw €40 at a new controller via...

Cheers, Im pretty sure the cable is exiting down and its bad photography making it look otherwise to you, I dont think that heat shrink can shrink that small as to squeeze the cable how it looks. I had it pointing up and backwards on the first fit So have already tried to fix that once by...

Cheers , even though i know how unreliable utubes can be they have provided me with most of my ebike info to date ;) The cable leaving the motor struck me as vulnerable so i added a bit of heatshrink..

I am a newbie but i did perform a forum search for waterproofing before i decided to post :) and all i got was battery stuff (at the top at least..) My rear hub motor isnt waterproof the suppliers web site points it out.. and although the bike lives in a garage overnight usually it rains a lot...

Yes indeed just been browsing another post with similar issues where the 16mm and 17mm crank diameter issue is raised ;) DOH! so i must have a 17mm crank.. I think i shall look for one of the clamp round style magnet disks and sensors you tie to the frame too.. OH boy the controller is total...

It certainly didnt feel right at the time too ;) not much to show in photos without pulling off the pedal arm and even then i dont know what you would see ? It looks exactly the same as a sensor off the crank but with any gap between the inner and outer aspects squeezed shut tight. it...

fwiw the locked configuration out of the box of the yose power kit might not suit you and the fix costs extra.. I upgraded my cycle this weekend past and found the power modes 1-2 are so late to kick in that i have generally surpassed the speed they are regulated at when it does kick in and pas...

Imho a reasonably priced insurance policy is your best defense against theft after the best lock you can afford.

Hi All I am new to all things ebike, I fitted a Yose Power 250w rear wheel kit over the weekend while taking the opportunity to upgrade from 6 to 8 speed at the same time. Having been screamed past by overpowerd ebikes for the last 5 years or so only to se the rider walking the next week made...