Search results

Hello, I finally changed the tyre of my mountain bike and they are true now. But the bike remains wobbly on the road and it was difficult to turn as headset wasn't properly installed. I decided to open it and found out that the bottom part of the headset was fine with the bearing installed...

Hello all, I had a puncture on my rear wheel of my dahon jetstream today and I noticed a crack on my rim: I think it may be because of the motor weight (7kg) and it would need something stronger and much more reliable. I'm thinking to get this bmx rim...

Hello, I'd like to get this cargo bike frame: http://www.juicedriders.com/shop/ But I don't want to pay more than £250 for the frame. Maybe I can stretch a little bit but I'd like to keep budget low. Any way I can have this frame or similar one for my budget?

Hello, Found this: https://www.kickstarter.com/projects/flykly/flykly-smart-ped They have an event tomorrow in london which I'll attend after work. Apparently it's going to be legal... If so, I can't wait to get one and overvolt it :D

Hello all, I noticed that every time i install a marathon plus tyre, my wheel becomes untrue. I tried few times to remove the tyre and see if there is a bad tube fitting but I can't really find any. I tru-ed the rim first to make sure it's not a problem with a bend rim, when I install the tyre...

Hello all, I noticed that there is a lot of water condensation inside my headlight: https://www.dropbox.com/s/hsc9hzr4hq0w5ng/2015-10-10%2014.21.14.jpg?dl=0 The light cover doesn't seem to be removable, any idea how to remove that? Thank you

Hello all, I realise that lots of people are asking me if it's a moped... and some are telling me it looks more like a moped than a bike: Even without the top box they say it's a moped :( How can I make it look more like a bicycle? Is it just because of the top box? Is it because of...

Hello all, I'm doing a mission impossible now: It's completely stuck, I hammered my wrench but no results. The picture isn't correct, I'm doing it on the non drive side anti-clockwise... Doesn't work, it's damn stuck. Looked at youtube video and they talked about a cheat bar... which I...

Hello all, I've been using my dahon for carrying stuff: Unfortunately, the aluminium rod weren't up to the job and started bending... I'd like to change the tube to have something stronger, and also longer, and requirement would be to ideally be strong enough to carry a passenger...

Hello, I discovered this: http://www.decathlon.co.uk/bclip-500-bike-trolley-id_8307963.html?gclid=Cj0KEQjwsIWvBRCnzevvor2g4L8BEiQAAN234Qz6SOgfjjROcx7xZ9ki3Spy-zDDhSnbPzQ6LtnOJeYaAunW8P8HAQ Or this: http://www.amazon.co.uk/B-Tourist-Shopping-Trolley-Bicycle-Trailer/dp/B00OMBFV2K It looks...

Hello, When my motor is running there are some squeaky noise, like the one I use to hear on very old freewheel: I am not sure if the noise is coming from the motor or the freewheel... and the freewheel is indeed very old. Some notes: - When it rains a lot, the noise tend to be much less...

hello all, I realised my Dahon jetstream has the potential to be a cargo bike! However the on the rear weight is bending a bit the aluminium rod: An alternative would be to use the Axiom flip flop handling a max of 15kg...

Hello all, Moving is pressing now, going to make massive sale for cheap: 26" rim - £10 24V 200W power supply - £15: Failed i1010b - 300 charger - £15 (worth £76) http://hobbyking.com/hobbyking/store/__6609__iCharger_1010Bplus_300W_10s_Balance_Charger.html 12V to 80V 600W DC-DC step...

hello, I have 18650 bracket holders: 200 * 3P holders: £35 250 * 2P holder: £35 450 * 1P holders: £35 I'm downsizing and will have to move out again soon. I'm doing a massive sale and everything will need to go apart from 1 bike. My loss, your win. + shipping or free to collect in london.

Hello 48V charger for sale: £29 A 48V PFC charger: £29 24V 200W fanless power supply: £19 600W dc-dc converter to 84V if you need higher voltage: £10 I'm downsizing and will have to move out again soon. I'm doing a massive sale and everything will need to go apart from 1 bike. My...

Hello BPM2 328 RPM on 20" rim. Fully working. Careful on the wiring as it has been stretched a bit. I'm downsizing and will have to move out again soon. I'm doing a massive sale and everything will need to go apart from 1 bike. My loss, your win. £99 + shipping or free to collect in...

Hello, I'm selling my Q100H from bmsbattery with 26" wheel: https://bmsbattery.com/ebike-kit/63...l-ebike-kit.html?search_query=Q100h&results=5 And 48V10AH sine wave controller and battery: https://bmsbattery.com/ebike-battery/681-48v10ah-bottle-09-e-bike-battery-pack-battery.html And torque...

Hello, I'm selling my BBS02 purchased from BMSbattery last year. It is a 750W version. 48V 25A. It is working fine apart from: - A little click when pedalling but apart from that it works - Screen a little bit damaged but can still see (I felt) and nothing change on the functions I'm...

Hello, Mountain bike that has: - Tektro hydraulic disc brake - Full suspension - Quite solid - Cassettes - It has been reliable so far However, I'm downsizing and will have to move out again soon. I'm selling all my bikes to only keep my smallest bike (Dahon jetstream) For all fully working...

Hello, I purchased a year ago a kona stinky but never had time to convert it. And now I'm in more or less a nomad situation so I can't keep so many bikes. My loss, your win. The chain has been removed and the rear speed need to be bolted back. I can do it but don't have time... Otherwise good...