Search results

if you want the ars back to original you need the smooth D and not W like on my drivers

the inner part that glues to the cone has its angle set already

1031a are 2 way monitors my 1038s are tuned to my room pita with out the amp rack mount :)

https://medias.audiofanzine.com/images/normal/genelec-1038a-5665550.jpeg my foams not that bad lol

http://www.aphenos.net/electronics/speakers/klh/all_ar.htm

https://www.genelec.com/previous-models/1038a

get a quote from Wembley loudspeakers cos when hes dead thats it...

room eq wizard software and you need a db meter with a line out put now i have seen those bass drivers b4 :D

https://www.ebay.co.uk/itm/235122405202?hash=item36be632f52:g:OPIAAOSwpidkyp5r&amdata=enc%3AAQAIAAAA8L1bs6dYUJuT6fYVzjLpdIxSRi9MwrNIh7cLM0Ld9t6C1ymdQExPOkZYGgN%2Bu8PSN0Uj21pGZ5bbphDEabGKOrhix3seuc7RcYqkB9mMSj1F8rjAexkNBP%2FH3fjJ%2BdldEgpH%2B4UZBm7%2Boop2%2Fom%2BZ70oGbZZJgCM4PyZjyH3Jzdi4%2FAVhljfg...

decent ported speakers cost a fortune esp front firing ones like mine as why they have those wave guides ;)

the glue takes time to set i think it is just fkn wood glue tbh it smells like pva as well so will have plenty of time ti pi$$ about with it

https://northspeakerparts.co.uk/products/acoustic-research-ar-14-94-35bx-m6-10-foam-repair-kit...

was not a batt he wanted a psu to use the cam with wall power and it blew it to bits.

the hard part is moving the bloody things, my tyres have all flat spotted from the waight. the glue also drys clear like wood glue all you need to do is shim the voice coil, bog roll strips fit in mine get a cake turntable apply the glue with a brush and stick it on...

what make motor does it have ? https://www.binneywood.com/products/impulse-motor-36v-e-bike-170519005

yes i have a kiox display i had to take it to a local bosch dealer and it span out there tiny minds out :p https://www.pedelecs.co.uk/forum/threads/emtb-owners-photo-and-ride-thread.24089/page-138

well that saves me 2k 6 euro :p

px it for a cx motor if he has one but you will need a 1.5mm spacer for the front chain ring ;)