Search results

done exactly as instructed [/URL][/IMG]

d8veh I printed it out as you said, I but I have had this problem before with it I will try again[/IMG] http://i843.photobucket.com/albums/zz360/robdon6robdon/PIC0050_zpsbaa73af5.jpg[/IMG][/url]

I have just been going through the different programs on the imax b6 and have one INPUT POWER LOW cut off 11 .0 volts, do you think this is the problem, in the previous photos the pin strip looks as though it is not connected but it is, I can read the battery voltage off the end that connects to...

from photobucket [/URL][/IMG]

the pin strip does not fit the ribbon cable, so I have to insert the pins by hand individually, I can measure the voltage of each cell on them ROB

photos[/URL][/IMG] I cant get photo bucket to work, I can upload the photos but when I copy them I get along file, anyway here are some ROB

the cable I used, on the bms cable, I have to insert the six pins separate by hand, It must be a different pitch, but fit into the charging connector ok

ok but I will have to set it up again, i will post it later, than you for help, ROB

I may have to start charging with a usb cable if no one has had this problem, using the imax b6, I will check all my cables first. ROB

I deleted two posts I do have voltage at the banana plugs ROB

I get 3.5 v 6.9v = 3.40 10.26v = 3.36 13.74v = 3.48 17.26v = 3.52 al above 3volts

I have it set at Lipo balance or lipo charge both at 1 amp on left 18.5v right side 5s, when I press start for 3 seconds, every time it goes to battery check then low voltage, I have a 5s plugged in, plus the power arrangement explained by d8veh I do not get the error ? ROB

I have the imax B6 coupled up as instructed, either charge or balance charge. Set up for lipo 1 amp 5s and when I press the start button for 3 secs it comes up with, BATTERY CHECK LOW VOLTAGE, how do I get it to charge or balance charge ROB

yes power supply to 3 pin input, thin wires to + and - jack plugs, balance wires to 6 pin balance socket ROB

I have a12v 5 amp power supply, and will use the crocodile clips to couple the positive and negative to the output of the imax, is that ok. red to red black to black, thanks for your help ROB

do you mean like this

I have plenty pinstrip I know what you mean now, and the two extra wires positive and negative to go to the power on the imax

I have got six pin, pin strip, do I solder the pins individually onto the leads or leave the plastic on, also my 7 wire balance lead consists of wires,1 red, 5 whites and a black do i splice thin wire into the red and 5th of the white leaving black out, and yes it is 11 pins when I splice these...

Earlier this year d8veh took me through balancing the cells of my 36v 15ah lithium battery, I got it up to 41 volts and was happy with that. I balanced it using a 5v usb cable through the balance wires on the BMS, I kept checking it for a couple of weeks and it stayed at that voltage, so I...

I have all the parts, might be able to make something up. ROB