Search results

Listing as 'mAh' is RC world battery talk associated with Lipo, for China sellers 8000mAh sounds more potent then 8ah. However we aren't used to seeing Lion batteries listed in mAh, ah or kwh yes.

What's wrong with it ?

One is likely to find it nigh on impossible to find them for sale.

What is the teeth count of the two stages . One needs to define the actual hub model number. Though the clutch say's G110 250D , there is no such hub model number. One could send a pic of it to Topbikekit to see if they can supply a clutch.

Before I went over to Holllowtech BB's & BZ10's, I once had a std 12 pole disc on a Sq tapered BB set up and C1/03 operation was pants , C1/02 and it worked better. But for some reason the 12 pole was a still a little erratic in operation, never looked back after using 10 pole BZ10's and...

Yes indeed a typo.

Set C4/02 should do the trick.

We see some with an agenda who simply can't help themselves, by planting non topic related chat in to threads . It is also happening in the ebike fraud thread, now they are veering off talking about war and who is going to do what. There is a general chat sub forum for things political or war...

My disk space is partitioned so W only has smaller part of the disk. Linus mint upgraded today from Cinnamon 22.1 to Zara 22.2. I had to go in to W10 to use my printer as it isn't supported well on Linux, boy is W slow compared to Linux.

It must be a KT PAS sensor .

P1/87 should mean if the hub motor gearing is fairly std at 4:4:1 then the hub should stop assisting at 15.5mph. One can check the display speed with a GPS when riding. If speed reading is low raise the P1 value and vice versa.

Typical P settings are: P1/87. P2/1. P3/1. P4/1. P5/12 Typical C settings though C1 may need tweaking ! C1 is dependent on PAS used but your type 01/02 or 03 will prevail. C2/0. C3/0 which is PAS assist 0. 1 - 5 indicates the PAS assist auto selected at start up. C3/8 will select the last...

We always advise if changing controller make, then to buy the peripherals that go with them as a kit esp when julets are involved because one can't see the wire colours at the pin . Peripherals like PAS, speed control device are cheap to buy with the kit. A lot of us if mixing matching use SM...

Set C1 /1 see if the Led flicks on /off as the magnets pass, try refitting all magnets and set C1/3. If the LED flicks on/off then a signal is being received. If LED doesn't flick on/off then the PAS Julet wire sequence isn't compatible with the KT. If no LED one has two choices: 1. Buy a KT...

PAS = Pedal Assist Sensor. It is located at the Bottom Bracket and can be on the LHS or RHS. You have the two piece type which consists of the magnet disc and a wired sensor which the magnets pass by. The magnets in the disc pass the sensor head and sends a signal, the gap between magnets and...

They all come from China . Amazon don't make them, they are just a shop.

If PAS doesn't work then there can be a few reasons. 1. Wrong PAS setting in C1. 2. PAS not fitted correctly. 2. Incorrect wire sequence. 3. Connected to throttle connection at controller. We need to know which PAS you have and type of connector. Once we know which PAS you have , then C1 can be...

It would be silly to buy pads and find the listing is wrong and they have changed the design, wouldn't be the first or last time a China listing isn't right.

Yes. Personally I would wait until the calipers arrive and confirm the listing is correct. The calipers will arrive with a set of pads fitted so you will be ok for about a year so no rush to buy the pads. That said I don't know your braking method or terrain you ride, I once went wore thru a...

The brake pad shape is AO1S designation, they are shimano pads so any you find are simply copies of them. Many differing brands copy them and also many brands make calipers to suit the brake pad.