Search results

I think it has a torque sensor, so you would probably want to install the throttle as well as per the Woosh page "Please note that with torque sensor, the motor output is proportional to your pedalling. You have to pedal harder when climbing a hill. If you have some physical issue, add the...

How heavy is that kit ? about 6.5 kg ? Add in a facebook marketplace 26" hardtail https://www.facebook.com/share/1Rie72LF1N/ less than 20kg in total

they have a 350w freewheel kit with battery https://yosepower.com/products/e-bike-conversion-kit-36v-350w-27-5-rear-motor-kit-for-freewheel-with-36v-13ah-battery-and-charger

Are you hitting the maximum speed of the hub motor ? -looks like top speed around 20 mph ?

Welcome -what is the off road bike you are thinking of converting ?

Sale on Yosepower kits - eg this 250W casstte kit with 36V 13Ah battery for £310 https://www.yosepower.co.uk/collections/e-bike-conversion-kit/products/36v350w-26-28-rear-e-bike-conversion-kit-for-cassette-with-36v13ah-hl1-battery Add a facebook marketplace bike with disc brakes for £100 and...

I just tried searching the forum - sorry to be the bearer of bad news https://www.pedelecs.co.uk/forum/threads/just-seen-this-bike-via-gogoling-by-chance.38779/post-575225

These look ok with hydraulic suspension and hydraulic disc brakes and 540wh battery https://www.infinityebikes.co.uk/product/eleglide-m2/

https://wooshbikes.co.uk/?faro Quite a light bike, thoughtful commuter friendly spec with good customer service / support https://www.pedelecs.co.uk/forum/threads/woosh-faro-review.37721/ For riders < 100kg

If I was doing a cheapo bike £80-£100 for a hardly used bike with disc brakes This one advertised for £100 open to sensible offers https://www.facebook.com/share/1Hjht8WoPM/ £330 for Yosepower 27.5" rear cassette kit (could get a 250 W front hub xf07 kit with KT controller and 36V 13 Amp...

It's very cheap, quite basic, steel frame (heavy) , single wall rims, Shimano 7 speed, but I think it will work fine as an e-bike What would you use it for ? Roads, tracks, how far ? Hilly You could convert a Facebook marketplace bike yourself and end up with a better spec bike and tailor it...

She's very pleased with it

Near me, North Yorkshire / Teeside https://www.facebook.com/share/1CFTJnbxJx/

There must be tens of thousands of people riding round with that default keep current setting

My sister is using the tongsheng 48v Tsdz8 (Woosh has a version which is rated 250w ) and she's doing 60 mile rides with 5000 ft of ascent with no problems, all her friends with Yamaha and Bosch motored bikes are a bit jealous, it's very powerful. There's reports of overheating problems with...

With canbus & Bafang Go + (if you have the right display!) you can change wheel size, pas power levels and pas speed limits. I don't know if the silly keep current setting is still shipped like that, it seems bonkers. Plenty of UART kits still being sold

Usually there is a function on the screen (eg press and hold + button) that will power the bike at walking pace so you don't have to push it, called walk assist motor cable connector : As @Nealh says, the other obvious thing is to check the pedal assist sensor (often attached to the pedal axle )

From a diagnotics angle - does walk assist work ? Is the motor cable connector in right up to the line ?

That Fiido says 24.5kg ? Woosh Faro 16.5 kg with mudguards and rear rack UK based company with good reputation for customer service and support https://wooshbikes.co.uk/?faro

The 250W motor continuous rated power legislation applies off road as well, any place where the public has access. The 350W Yose motor is faster than the 250W one but is worse at climbing hills. I quite like the Hailong downtube battery holders with the in-built KT controller. You will need a...