Search results

Regarding what you said about checking hall sensors and phase wires I’m sure they are ok, as why did motor run since it’s been in my flat. As like I said it went at 1st. I’m also wondering if it’s because of using this new controller. As ERider 15 model had SLA. Batteries but also the idiot...

there is no fuse inside charger. But would green light come on if it’s the fuse in the plug as I’m sure you won’t get any light on charger I forgot to mention but don’t think this will have a fuse as it’s a adapter what those 2 pins plug into so it does seem it’s the charger gone

you mean plug it into mains but not into battery, as just tested it, and nothing at all put meter on 200V DC so maybe this is my problem the charger and not battery. although why did battery go down at 49.5v after being fully charged. can you recommend then nealh a good 48v charger with a...

hahhaahah having a bad day ya having a laugh LOL Im having a frigging bad year. well about 5 months frigging bloody moped.

on the discharge lead its same 49.5V same on the charging lead too when green light is on I measured on those 2 screws on jack plug + and - same 49.5v

Well Nealh I was really hoping. I didnt have to do all that again. dam bloody moped. should never have bought it. But its just that I got so far by trying to fix it. it gave me some more hope. Im no hurry to get it sorted well am in a sense to get it out of my dam flat. and in my shed ready for...

I have to be 100% Nealh its the battery, as I will contact the seller in china, doubt he will do anything, but will see. as something isn't right agree, and i would have thought 49.5V would be enough charge to turn over motor

Well is that 100% it is the battery, it was august 2021 I bought it. but had to wait a month for it to arrive. so say sept 2021 so only 9 months old You say lights and display do not use much voltage. but isnt 49.5V enough to make motor run then. as I have been told no need to keep charging...

Why would i come back to complain. Nealh said Brown, as I believe he has seen charger before. Im sure he wont have said brown if he didnt know. I have now also placed meter on 200V DC placed red probe on blue wire - and black probe on + and it said --- 49.5 v which indicates to me...

do you have a link to that 1 on ebay, Not that I'm going to buy it lol as had enough of this model 15. and yes I have been thinking about ringing a scrap dealer, But something says carry on as I have spent a lot of this moped. But doubt I will get much, But have to sort it 1st before trying to...

well this is most weird as just plugged in battery and ignition came on display all lit up but throttle won’t work so no good yet. But this battery like I said is only 9 months old. And I can’t access the bms on battery as would mean me cutting blue tape and would loose warranty I would think

thanks plas man I’ve already seen. That np then I did ask ERider but they useless they said they don’t supply diagrams

How do you do that the battery is only 9 months old 48v. 30 Ah

Well something really wrong here as I just wired up my 48v charger as both wires had came loose so I asked which is pos and negative out of the 2 wires brown and blue you nealh said brown so put brown to + blue to - on the Jack plug plugged it into battery charge port. Green light was on but...

Can someone here tell me on a 48v battery charger with 2 wires brown and blue which colour go to positive is it brown or blue

Well I have just fitted new controller, not joined up those 2 wires yet at no ( 1 ) as waiting for white connectors. fitted battery turned on ignition nothing at all. well sorry it read about 0.0.3.7v I maybe wrong there. I put multi meter on 200v DC, placed black probe to gnd. touched...

Can you help here Nealh, as Im a bit confused which wire go to where at number 1 in the diagram above in #69 post or will it do harm if its wrong way. as on this new controller the wire colours are different. I don't think it will harm anything if they wrong as if so I will just change them over

There's no problem with soldering irons I've got 4 all good ones. also I don't just crimp the connections on those white plugs I will add a bit of solder as well

Dam I hope its not inside the hub, as it will mean taking off the wheel again, and removing motor, I personally don't think its a wire off inside motor. as how comes like i said before, after me and my brother lifted it up 2 flight stairs, to my flat so I can look at it. I said to my brother...

Hi Nealh will this be it It looks as if I am going to have to remove yet again ggrrgghhhhhh the seat part and also all the rear body work, as no way can you remove the controller. its jammed in there too tight. so Im hoping its not the controller. as its not easy removing all the...