Search results

Never heard of that before, is it just a different outer cable so the cable wire dont get stuck.

Well I defo need glasses, only trouble with Aliexpress is they either charge shipping fee and if no shipping fee its tax on top, they never used to be like this

Well I will wont bother fitting Hydraulic brakes for now, as Ive ordered pads, but will buy a few more for another time they go down these are the pads I need but cant seem to find them on Aliexpress

I wont have a clue how to fit those, to my bike, so you say no cable so how do they stop the bike. is it all done by oil or what ever

Yeah thats what I thought, also just had a reply from the seller and he confirmed its front and back 2 times. I am also fitting new brake cables. Ive pulled the old ones out, and ordered new cables. is there a special way to thread them through black cable, or will they go through ok

SooDoo https://soodoo.co.uk/collections/all?srsltid=AfmBOooBr2blzMR-agRm5mQJqohceWykCI9H8CGHCvuki9IEgB4NPyU_

No as no name on the brake pads but look above as i have posted images of the pads post no #1

so am I correct its front and back brakes for 2 bikes yeah, as it said £4.99 for 2 pair, so if I ordered 2 x £4.49 sureley thats for 2 bikes front and back btw i have contacted the seller

Well I have ordered where it says buy 2 for £4.49 each. so do that mean its front and back brakes x 2 lots I have just noticed, it says from china, but there estimate says so hope thats true

Well I wasnt going to wait from 26th November to 1st Jan so I am hoping they arrive before this saturday really but cant say much when it says estimate from 9th dam halfords was a waste of a bike ride humping the bike down 16 steps only to be told by halfords they dont do those sort, then...

Thats cheap but then again it says 14th to 20th November I need them ASAP so went here and ordered 4 pairs as it says sat 9th to 13th November. I take it when they say a pair thats for front and back brakes, so 4 is another spare yeah https://www.ebay.co.uk/itm/204870624355 But its a...

Yeah I did happen to see that page, after I posted here, but only trouble is they say I cant wait that long. I am on a 1st floor flat so 16 steps to carry up bike each time, so I just went down 16 steps again lol and decided to bike to halfords, a good mile from mine, and no they dont have...

Hi all I need some info on buying new brake pads for my bike. I have enclosed images below, But cant seem to find the same ones. any help plus a web link would be most appreciated

Well it is rotating fine, but I can bring it back a bit

Well I knew if I messed about a bit more with this PA disc and sensor, it would give me much more space on the BB spindle to make sure pedal crank arm goes all way on, which obvious due to the PA large disc, it could only go so far, actuially I do believe someone here did say try placing the PA...

There is no thread lock glue on my bolts. But I am now working on the bike, But I think my problem is, I need to buy a smaller PA disc, as the sensor cannot be placed anywhere else I have tried. I just measured the space on BB spindle for crank arm to fit onto. I marked a line when PA disc is...

Ok best to eat tons of spinach then lol, and dont use a pipe on end of key Ok wont use thread lock glue.

Yes those allen keys are same as I have, maybe i could add a pipe bit to end of the allen key , to give it more leverage. I will try that today. Yeah that defo will tighten the nut PMSL :D Ok I wont use a washer, and like i said above will try tightening the bolt more with the allen...

Well Iwill try a washer but the end of bolt seems to be flush with end of crank arm opening

Well at present I only need the left pedal crank arm, as it seems to keep loosening as I pedal, even though the nut is all way in to BB spindle. I thought i had tightened it ok but obviously its not enough. I had thought about putting some thread lock glue on nut, but will i ever be able to...