Search results

true Labour = what? there is already a communist party of United Kingdom.

Starmer will be PM in 2024, don't you worry, Zlatan. He only has to avoid saying too much . The conservatives won't need any competition to lose the next election with internal fighting, those who love BJ against those who loath him.

Surprise, surprise. Huw Pill, chief economist at the BoE suggested that printing £450 bn in the two covid years is responsible for the rise in cost of living. A bitter pill: At last! Top Bank of England official finally concedes printing money - and lockdown - fuelled inflation crisis (msn.com)

I don't have a problem with Kwarteng saying that the mini budget wasn't his idea. It was probably Chris Philp's that Flecc knows well. My problem is that the conservative party has run out of good people since the brexiters took over. All the better ones voted for the losing side in 2016 and got...

It's making the news at the moment: Kwarteng said that he had warned Ms Truss about going at a “breakneck speed” with economic measures after the mini-Budget. “She said, ‘well, I’ve only got two years’ and I said, ‘you will have two months if you carry on like this’. And that is, I’m afraid...

CS is usually programmed with speed control: assist levels are paired with increasing speeds, level 1 with 8-9mph, level 2 10-11, level 3 12-14 etc. These pairings don't stop you go fast, they only affect how power is delivered but result in two minor irritations: 1) too much acceleration when...

when you think about that, the Pound could not be exchanged for gold since Bretton Woods. The money you have in your bank account is just a number, it's no safer than a NFT held on some computer. Shares you hold at some brokers don't even have certificates. Your bank cards are also prime...

18650 20R cells are typical for use in power tools. 2000mAH, 22A maximum discharge current per cell. Suitable for high output to the detriment of longer life. When a brand is unknown, it is usually made in China. 20R cells are not ideal to make high capacity batteries for e-bikes. for that, you...

Germany is legalising weed. You can have 30g in your pockets and 3 plants in your flat per person.

Well, that's the world we live in. If Mark Zuckerberg sells land in his metaverse, I would be tempted.

I blame the replacement of metal parts with plastic.

yes, I did and agree with you on Elon Musk. There are plenty of billionaires on the back of the crypto craze. Sam Bankman-Fried made the headlines yesterday.

54.8V / 13 = 4.21V It's perfectly acceptable. when the charger's output has noload, the voltage you may read on its output terminals can be anything because it's in protected mode so if you want to measure the charger's output voltage, measure at the battery's output terminals. There is also...

I saw that you have now coloured both positive and negative ends of the cells and added the welding strips, it's very clear that you take great care. Congrats.

those two are idiots. It's their kind of argument that gave us the Truss and Kwarteng mini-budget. As far back as the OBR was first setup, all their forecasts were wrong but they were less wrong than those of successive chancellors. The blackhole in government budget is endemic and always bigger...

you should consider the 48V TSDZ2 with throttle instead of 36V and no throttle. The TSDZ2 mechanical motor is the same for all versions. Tongsheng fit different set of LCD and controller according to customers requests. Basically, they have two controllers: with and without throttle, and each...

you need to be careful with the layout on the other side. Best draw the groupings with marker pen where you intend to group and post some pictures here for checking. Even though you are not selling the battery to someone else, it still pays to be extremely careful. Check and check again before...

for 13s7p, you group them to 6 blocks of 14 (2*7) plus one block of 7. Same on the underside. If you are not experienced, don't go there. There are a lot of cells in the pack, if your welding equipment is not up to scratch, and one of the inner welding spots fails, you'll lose the whole pack...

the 48V is better for steep hills thanks to the 30% higher voltage. You should be very careful with reprogramming if you choose to alter the original program. The BBS01 has less strong magnets compared to the BBS02 and BBSHD. When the magnets are saturated, like when you use the motor at...

Keep in mind that heat kills the controller and what produces excessive heat is when the motor runs in inefficient conditions such as running the motor on maximum throttle made even worse if in a wrong gear. This is the area where a hub kit is advantageous.