Search results

Nealh. How do you lengthen a chain do you have to buy spare links and if so how do you add them. And lock them

Hi Nealh so you are saying to fit the ones ERider sent me as I have ordered these from eBay as the ones from ERider seem too long which makes the chain too taught also with having a bolt in that hole is a bit impossible as don’t line up. But I think if I shorted them a bit then maybe drill new...

Hi geurney thanks for your congrats. It means a lot. The reason why I have stuck to it, is because I don’t give up on things. And as I had spent money on a battery plus a few other parts. I wanted to get it fixed. It’s been like a hobby to me I’m opening my 1st electric moped shop soon lol...

Here are some images of torque washers, But I also have before those the ant rotation ones, so maybe its best to leave the anti rotation ones off as I cant fit those if I fit the torque ones 1st as the anti ones wont fit into drop outs then I was watching some youtube videos on torque washers...

Well this is what I have so far, But the chain is same as I have had from since I bought moped. I have a washer on inside of spokes, and on the outside is a rotation washer plus a big washer then the nut. but how can I tell what size chain to get then, would that mean unlinking chain...

Nealh if you about Im having a problem fitting the torque washers, as its making the chain far too tight. I have the rotation washers on ok so will they be enough 1 on each side. But its real hard to fit the torque ones

Well I will now have rotation washers and also torque washers on axle plus that loctite 243 glue on the thread so hopefully that will be ok as can’t see axle turning again. But like I said will do just a few walking distance runs first. But I’m sure it will be ok 4 months been doing this lol...

Nealh if you about, I have fixed the hall sensors pcb board wired it all up and it went 1st time. so well happy with that. didn't have to do the learning wires or do those combinations. I just have to fit all the proper anti- rotation and torque washers etc to wheel. I am only taking it for...

Hi Nealh just to let you know at long last after waiting 5 weeks the hall sensors pcb arrived today 12th march so will fit 1 and hopefully it will run straight away if not will have to use those learn wires. or do the combinations. which I hope I don't need to. will keep you updated later...

Ok many thanks Nealh will update you when it’s fitted

Will this PCB be ok nealh as Ive gone and ordered it as I cant seem to fix old one.

Well I have tried the 2 orange wires, a few goes and its still same with wheel. so I have ordered this. is this one ok as it saves messing with the pcb again, as I think maybe a piece of the copper trace has rubbed off while soldering. I know i will have to remove the sensors again, but I...

Ok will try tomorrow. As been on bike all day need a break from it. But it’s slowly again getting fixed. As I know it will go, as if the axle didn’t rip cable it would have. Btw I have just took another image of wires and there is also a white plug with a pin slotted in. I have heard or seen on...

so I try bike 1st with wires joined if its not right disconnect and also disconnect battery then join and start again I just tried with white wires joined, and wheel still is same, so will try again I have unjoined plus turned off controller unless its those 2 orange wires are learn and white...

Ok thanks for that. so I join the 2 white wires first try bike, if no good disconnect white wires. then plug in again try bike etc until its running fine then disconnect

I dont really know if they are speed wires or learn I would imagine learn I will send a photo ok well there is 2 white and 2 orange. so if say the 2 orange are speed ones will that make moped go faster or slower not that Im going to try them but just curious is it ok then to join the 2 white...

yes I think there is learn wires will look yes there are 2 white wires what seem to join

A short video of what's happening, its obviously the hall sensor pcb, But where I probably need a new pcb maybe this one...

Well Bad news that hasn't gone right, as something is rattling in back wheel plus its not turning fast dam I so fed up with this thing now good mind to call dam scrap yard, but it has been running great. until it broke cable. plus also now a Allen nut has snapped off on 1 side of case but it...

Well I've soldered them in, and is this hall sensor test https://ebikes.ca/documents/HallSensorTestingFinal.pdf right, as it says red+ black and yes I get about 5v then it says black + yellow black+ blue and black+ green, But how can that show any results if the red probe isn't...