Search results

Did you ever find a replacement one? The internet of things says the worse thing you can do after water damage is turn on said device, it is better to dry out the water for 7-14 days before attempting a boot up!

Would it not have dried out by now:p My KT-LCD3 got water in it after I power washed the bike, I used the old method of leaving it in rice for a week, its worked ever since no problems, luckily I had a spare I could use whilst it was drying out.

Did you know that the magnet disk comes in 2 halves, once the metal outer ring is removed? Well either way it looks nice and I am a bit jealous, I got one of them without the julet connector and tried to add one of my spare connectors and it failed, I think it was faulty though. This is a...

Sorry to hear that, I think neahl did mention something about the "L" so kudos to him... You could do what I did and chop the julet connector off and rewire it a basic PAS, I will admit when I first got my kit I did want an inside the chainring PAS but it seemed impossible at the time and the...

Was this on topbikekit or somewhere else? Mine is similar, the sensor is bigger on mine, please let us know how well it works and if it fits ok - I had to remove the sensor and fashion a piece of metal round my back wheel frame which I attached the sensor too and then used my 12 magnet disk...

Which one did you go for in the end if you don't mind me asking?

Erm I take my battery off the rack when not in use and make sure the off switch is OFF - never had a problem yet:confused: Does this happen when the on case power switch is off?? surely not:eek:

I can say the 250w front has limited torque and I found as a shopping bike it was fine 10-15 miles a day, slow runs out on a sunny no wind day and its fine, however when it comes to hills and head wind it lacks that little extra and you will find that you will have to put some effect in, mine...

Any KT PAS should be ok - most of pages 8-13 of this thread should have a few links - have a look on topbikekit.com(best for julet) or pswpower.com or bmsbattery.com all these site have different prices and shipping cost I think there is a cheap one on banggood.com but if its like mine it may b...

Not to sure of what you mean - But I have a front hub YOSE 250w and I would say IT IS NOT the same from what I have read on this thread the 350w YOSE has a higher RMP than my 250w. My 250w would not exceed 15mph on throttle alone, even on my 350w system yet my 350w front hub (not YOSE) will...

I'd love to see this box assuming it has the HS on it?

Still in a triangle bag?? Oh I was imagining one fan either end of an open controller or with holes in the panels, one blower one remover, with the heat sink on top just for add effect, but I suppose my idea kills any waterproofing - just of of curiosity how hot are we talking about before cut off?

So where did you locate the fans on the the top of HS? and I assume the air flow was like a PC sucking hot air out not blowing cold air in, or would I be wrong!

Nice little fan setup by the sounds of it, have you but could it be a sign the controllers on its way out? Have you done this hill many times before?? how many miles has it done? The 48v HaiLong batteries are out of stock last time I looked:mad: A spare battery comes in handy defo recommend...

oh by the way - Hi tim and welcome!:) I have used Gearbest for action cameras, banggood for little bits(Thailand) and fasttech - YOSE is a china company using a warehouse in Germany to ship stock it saves us and I believe them money on customs duty... Topbikekit is and UNSECURED site but if...

I tend to agree with you here, however I have a few spares all julet and don't like to waste not to mention that the LCD3 setup is $100 at paypal's exchange rate your looking at best part of £85, to me that seems a lot of expense, that's why I mentioned to topbikekit the julet connectors on...

Torque arms are no fun at all, did it not want to fit between the nut and frame? I understand how hard it can be installing a TA my video got slammed on my "take" of a front internal TA, since that video I have made some changes, using my old eyelet which is now the correct size and it is now...

Haha quiet right good sir... I call it "faceit" face it your data will be sold to the highest bidder! - I have never signed up with facebook nor twitter, nor instangram - I gave into youtube and google which came with google plus what ever that is, I have had one google+ follower from the...

That is a curious one lyme - Here's 3 idea's- If you have email on your phone and the SAME email account on the laptop or access to it via the laptop, then using the phone to email the picture(s) as attachments to the email address you are using to send them, ie email them to yourself, they...

I will have a look at that - thanks I have just ordered a thumb throttle from topbikekit, it was most definitely a strange experience, but hay at least I now have an account with them - happy days!:rolleyes: