Search results

here are some pictures of the TSDZ8 (aka TSDZ02B Turbo):

it looks a bit like Dr Who's sonic screwdriver.

I would be tempted if I hadn't had already a full suspension bike. Excellent specs.

There are a few registers for things like changing voltage 36V/48V, kph/mph, wheel diameter, max Amps, speed limiter etc. How it works: the 5 PAS levels are power levels. It starts quickly. From standstill, you only need to rotate the cranks about 20 degrees, say you push the right crank from 3...

Tongsheng has finished my TSDZ2B Turbo! Yay..! I will arrange shipment tomorrow. They should be here middle of December, in time for Christmas. BTW, Tongsheng calls also the TSDZ2B Turbo TSDZ8.

that looks promissing!

It will have to wait until January. Sorry...

No, if anyone is interested, email support@wooshbikes.co.uk

I forgot to add that you need to drill a 10mm hole for the cable. Here is how it looks on the demo bike:

The hardware has arrived a couple of weeks ago, but I was so busy lately adding mobile phone support to the Woosh Bikes website and Andy was also busy with writing the manual for it. The good news is we are now ready to start shipping. https://wooshbikes.co.uk/?tskit This kit is only for 68mm...

I downloaded Cura 5.4 here: https://ultimaker.com/software/ultimaker-cura/

I have bike bags for this. It covers the whole bike against rain and weighs about 200g.

I am thinking of buying the Bambu Lab A1 mini after watching this video. I didn't think it was possible to print a 7-segment LED lens.

Saneagle explains very well, no matter the question.

I have an old Replicator 4. It's just not worth buying a replacement extruder. I still use the remaining good extruder. My main problem is I cannot print any thing taller than 3cm, I think the print detaches itself through vibration.

Yes on my XF08C and DWG22C rear hub kits.

I have changed my heated plate and nozzles. Not difficult at all. One of my two filament feeders has died. It's one of the reasons I am looking for a new printer.

The Gran Camino has Suntour XCM 100mm fork with remote hydraulic lockout and bolt through 12mm maxle which costs twice as much as the Suntour NEX 63mm on the NCM and about as good sprung coil forks are going to get without going air forks. The Gran Camino has internal cable routing, the NCM...

Yes, we do. When I convert a bike with shallow dropouts, I have a very good a 10mm round file. I spend 5 minutes deepening the dropouts. The risk with shallow dropouts is not as big with a rear hub compared to a front hub. The rear of the bike does not bounce as much as the front. You also put...

It's a lot of faffing for no real benefit. Millions of those rear hub kits have been installed without torque arms. Have you ever heard that their wheel comes off on normal road?