Search results

Show us the PAS and how you've installed it.

At 60kg, just about any kit should give you what you want. The easiest bikes to convert are the cheapo catalogue bikes with 7 speed gears on the back. Look for one with disc brakes. They're more than adequate to make a good ebike. You can upgrade the cranks and bottom bottom brackets to get the...

A bit longer. It's going to be Wednesday, Thursday or Friday. That's what you see as emptying his tank, but you've all missed his strategy.

The Kraken is about to be released. You lot and the dems have all been sold a dummy. Fair dos to him for out-playing everyone.

Something to cheer you up. The cat is priceless. https://www.ajournalofmusicalthings.com/todays-weird-music-video-the-trump-biden-bongo-band/

We get about 2 similar posts per week - always with the same sort of kit, and always the advice is the same. Forget it, and get a kit that will make your bike into a convenient and pleasant ebike. Show a photo of your Muddy Fox and tell us why you think you need a 30 mph 1000w kit...

have you got a donor bike yet? If so show us a photo.

Listen to Sidney Powell in this one at 5:10. What do you think?

Another happy ending. I'll sleep better tonight.

I'd get another bike to use as a donor - any one with a triangle frame and disc brakes. I've done one similar to that before putting the battery on a cantilever rack behind the seat. It was OK, but the handling is never as good like that because you have to have the battery extra high to clear...

Show a photo of your bike because there are different versions and frame sizes. Battery installation is probably going to take a bit of lateral thinking.

You can blow the mosfets in the controller if you try to run the motor like that. on'y use very low power settings until it's sorted. The first place to check is all the motor connectors. Bullet connectors can look OK, but are not actually tight or properly engages. The 9-pin cinnector has to...

Show pictures of your bike and controller. The original Benellis had standard Chinese systems, but I've no idea what a 2018 one looks like. I seem to remember a significant difference from the original ones.

12 magnet ones have the most compatibility problems. Let's hope it works.

A few days ago, a guy posted about his conversion with that controller with photograph/s. It would be much better to fit a throttle than use the walk-assist function. You have to cut the motor cable somewhere and solder all the wires. I'd cut the connector off that's under the chain-stay and...

I would keep well away from that kit. The listing shows three completely different motors, but I'm going to assume that it's the direct drive motor shown in the first picture. The listing doesn't include the motor RPM, which is the most important characteristic you need to choose a motor The...

A KT controller doesn't work with a SW900 LCD. You need a KT one, like the LCD3. The KT 15A controller, just fits in the space where the Suntour one is if you get the version with waterproof connectors. If you want the 17A KT controller, it'll have to go in a tool-bag, either in the triangle or...

Lin Wood confirms that they have seized the Scytl servers and they show that Trump got 80,000,000 votes. There's an explanation about how the Dominion machines work 9:00 to 12:00. Statement about servers being seized at 24:20. what the guy says at 42:20 about the vaccine is quite interesting...

Are the green wires still connected? Is there a 9-pin motor connector near the motor?

Then you can use a freewheel motor in the previous links or a cassette motor. The freewheel ones will probably be easier to install.