Search results

This is a AliExpress link and shows what you need, where ever you buy from show us the items you find so we can make sure they are correct (If wanting to use another source to buy from ). This is the controller with easy fit connectors, it also needs the 1T4 trunk cable that is included as...

Does the battery have it's own switch, this is the one to long press.

I never use amazon.

Ciclotek.es I think.

There is a Spain company that sell mxus kits and kt controllers and stuff but can't think of there name at the mo.

Try again with the motor disconnected and/or a dried out connector. The only thing to test for in the hub are the Hall sensors, if you use the link I gave go to ebikes.ca and select trouble shooting in the learn drop down box. Then select the relevant pdf to open.

Is the BMS in sleep mode , some of those batteries have to be woken up. I think a a 30sec press of the on button is a method of waking them up.

Ebike throttle on bikes tend not to be controllable, one can try a twist grip type but think the controller firmware/programming doesn't support such control with most.

Most light bezels unscrew so one should be able to place a Blue disc with in the bezel so it retains it.

One can get then on Ebay, Amazon or from Chian via Ali exp, PSW power & topbikekit. Also torquetech uk seller who is a forum member. You will need the 24/36 15a controller and a lcd3 or 4. The battery connection may need changing as the bullets types are a bot rubbish. If you want PAS or...

2.29 never had a reading that low, always been about the 9.9k mark. Though they are consistently the same for the Low side. The one reading is fine for the High side. Each mosfet type have an RDS (drain source resistance), most ebike controller one's are of the 9 - 14k range.

There are plod cycles with blue lights on, I don't know about the two's so one could try a solid blue light as well as White. It might make drivers think a bit or slow then down, also add one of those hi viz tabard's which equines use with the word POLITE notice on the back and it will work a...

The Law /rules for the road have changed to help us and other vulnerable users, one has to take control and command our new rights to the road. Of course I gauge the vehicle distance and speed, also now I make sure I actually stop the traffic at light controlled crossings. If I irritate the...

Been out for a cycle this morning and saw no car give way to waiting peds or cycles wanting to cross, I made vehicles sharply stop by simply crossing in front of them. The new rules is that they must stop for those waiting wishing to cross, the aim is to slow traffic and make drivers more aware...

My local Sainsburys and Aldi both have the Sheffield SS bike furniture. My local lidl and Iceland are p**s poor they have no dedicated racks so I lock then to the SS trolley furniture.

It's a no name OEM supplied item so you won't get one unless a Bet twin seller can source one. The best solution is to replace the controller and display with a KT/Kuenteng model.

Microshift Acolyte do a 8spd clutched one but it is only compatible with their own shifter.

SOC yes, State of Charge.

The elastomer doesn't act like a shock absorber up and down but with a gentle front to back movement ( parallelogram action). If the elastomer is correct for your weight one won't even hardly notice it doing it's job of absorbing road shock.

I have explained how to carry out mosfet testing so many times it gets tedious. Follow the instructions in the link. Set you dial to the left on to 20k in the Green section. BlownMosfets.cdr (ebikes.ca)